eric
Published © GPL3+

Digital Dashboard

Measuring engine data with Arduino and retrieve/display it over LAN in a webpage with awesome configurable steelseries gauges .

IntermediateWork in progress4 hours25,758
Digital Dashboard

Things used in this project

Hardware components

Arduino Ethernet Rev. 3
Arduino Ethernet Rev. 3
×1
temperature sensor ds18b20
×6
Opto-Isolator
Opto-Isolator
×1
hall sensor
×1

Story

Read more

Schematics

Original thermometers

ds18b20s mounted in adapter @ place of original thermometers

schematic optocoupler

Change the value of 560 resistor according to supply voltage, for 24V use a 1.5K resistor

Code

arduino sketch

Arduino
this code measures rpm of the main angine by means of an opto coupled hall sensor. It also reads a series of temperatures (ds18b20 sensors), steers an analog rpm instrument in the wheelhouse, and puts all the measurement data in an xml that is sent to the browser that has the instument webpage opened (this can be a local stored copy, the6 arduino does not serve the page itself, only the data)
#include <EthernetClient.h>
#include <Ethernet.h>
#include <EthernetServer.h>
#include <SPI.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#define ONE_WIRE_BUS 7
#define REQ_BUF_SZ   500
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
DeviceAddress ts_1 = { 0x28, 0x10, 0x1A, 0x1F, 0x00, 0x00, 0x80, 0xAA };
DeviceAddress ts_2 = { 0x28, 0x38, 0x15, 0x08, 0x00, 0x00, 0x80, 0x6C };
DeviceAddress ts_3 = { 0x28, 0x4C, 0x19, 0x1F, 0x00, 0x00, 0x80, 0xB7 };
DeviceAddress ts_4 = { 0x28, 0xAC, 0x19, 0x08, 0x00, 0x00, 0x80, 0x20 };
DeviceAddress ts_5 = { 0x28, 0x76, 0x1A, 0x1F, 0x00, 0x00, 0x80, 0xDB };
DeviceAddress ts_6 = { 0x28, 0x05, 0x1C, 0x08, 0x00, 0x00, 0x80, 0x38 };

float tempC1 = 0;
float tempC2 = 0;
float tempC3 = 0;
float tempC4 = 0;
float tempC5 = 0;
float tempC6 = 0;
float tempC7 = 0;
float tempC8 = 0;
float tempC9 = 0;
float tempC10 = 0;
float tempC11 = 0;
float tempC12 = 0; 
float tempC14 = 0; 
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xFF};
IPAddress ip( 192, 168, 1, 176);
EthernetServer server(80);

char HTTP_req[REQ_BUF_SZ] = {0};
char req_index = 0;
int analog_val = 0;
unsigned long lastmillis = 0;
int RPM;
int rpm;
int PinVal;
int OldPinVal;
String readString = "";
int counter = 0; 

void setup()
{

  Ethernet.begin(mac, ip);  // initialize Ethernet device
  server.begin();
  sensors.begin();
  Serial.begin(9600);
  delay(300);
  Serial.print("Live !");
}

void loop()
{
  if(counter == 3); {
    sensors.requestTemperatures();
    delay(800);
    tempC1 = sensors.getTempC(ts_1);
    tempC2 = sensors.getTempC(ts_2);
    tempC3 = sensors.getTempC(ts_3);
    tempC4 = sensors.getTempC(ts_4);
    tempC5 = sensors.getTempC(ts_5);
    tempC6 = sensors.getTempC(ts_6);
    counter = 0;
    }
  counter++;  
  analog_val = 0;
  lastmillis = millis(); // reset timer voor 0.8 sec timeout
  if (digitalRead(2) == HIGH) { while (digitalRead(2) == HIGH and millis() - lastmillis < 800);{} }
  while (digitalRead(2) == LOW and millis() - lastmillis < 800); {} // wacht op begin passage detector of timeout
  while (digitalRead(2) == HIGH and millis() - lastmillis < 800); {} // wacht op einde passage detector ==> startpunt meting
  lastmillis = millis(); // reset timer voor meting & start chrono
  while (digitalRead(2) == LOW and millis() - lastmillis < 800); {} // wacht op begin passage detector
  while (digitalRead(2) == HIGH and millis() - lastmillis < 800); {} // wacht op einde passage detector ==> eindpunt meting

  if (millis() - lastmillis < 800 ) {
    analog_val = (60000 / (millis() - lastmillis)) ;
  }
  if (millis() - lastmillis > 799) {
    analog_val = 0;  // timed out = toerental 0
  }
  // aansturing toerenteller stuurhuis
 
  RPM = analog_val;
  PinVal = 0;
  if (RPM > 100) {
    PinVal = 16 + ((RPM - 100) * .33);
  }
  if (RPM > 200) {
    PinVal = 49 + ((RPM - 200) * .37);
  }
  if (RPM > 300) {
    PinVal = 86 + ((RPM - 300) * .38);
  }
  // PinVal = conversie van toerental naar waarde voor de output pin
  analogWrite(5, round(PinVal)); // einde aansturing toerenteller stuurhuis

  EthernetClient client = server.available();

  if (client) {
    readString = "";
    boolean currentLineIsBlank = true;

    while (client.connected() || client.available()) {
      char c = client.read(); //gets byte from ethernet buffer
      readString = readString + c;

      if (c == '\n' && currentLineIsBlank) {
        Serial.println(readString);
        // send a standard http response header
        client.println("HTTP/1.1 200 OK");
        client.println("Content-Type: text/xml");
        client.println("Access-Control-Allow-Origin: *");
        client.println();
        // print the current readings, in HTML format:
        client.print("<inputs>");
        client.print("<rpm>");
        client.print(analog_val);
        client.print("</rpm>");
        client.print("<tc1>");
        client.print(tempC1);
        client.print("</tc1>");
        client.print("<tc2>");
        client.print(tempC2);
        client.print("</tc2>");
        client.print("<tc3>");
        client.print(tempC3);
        client.print("</tc3>");
        client.print("<tc4>");
        client.print(tempC4);
        client.print("</tc4>");
        client.print("<tc5>");
        client.print(tempC5);
        client.print("</tc5>");
        client.print("<tc6>");
        client.print(tempC6);
        client.print("</tc6>");
        client.println("<inputs/>");
        client.println();
        break;
      }
      if (c == '\n') {
        // you're starting a new line
        currentLineIsBlank = true;
      } else if (c != '\r') {
        // you've gotten a character on the current line
        currentLineIsBlank = false;
      }

    }
  }
  delay(50);
  client.stop();
  while (client.status() != 0) delay(50);
}

My dashboard

HTML
This is the webpage containing all the gauges, it updates the gauges by requesting data from the arduino over LAN connection
<!DOCTYPE html>
<html>
<head>
    <meta http-equiv="content-type" content="text/html; charset=UTF-8">
    <meta charset="utf-8">
    <title>Canvas Steel</title>
    
</head>
<body onload="init();" style="background-color:#020d1e">
    <table>
        <tbody>
                
        <tr>
            <td width="100%">
                <canvas id="canvasRadial1" width="240" height="260">No canvas in your browser...sorry...</canvas>
                <canvas id="canvasRadial2" width="240" height="240"></canvas>
                <canvas id="canvasRadial3" width="240" height="240"></canvas>
                <canvas id="canvasRadial4" width="240" height="240"></canvas> 
                <canvas id="canvasRadial5" width="240" height="240"></canvas>
                <canvas id="canvasRadial6" width="240" height="240"></canvas>
            </td>
        </tr>
        <tr>
            <td width="100%">
                <canvas id="canvasRadial13" width="240" height="300"></canvas>
                <canvas id="canvasRadial15" width="240" height="300"></canvas>
                <canvas id="canvasRadial16" width="300" height="300"></canvas>
                <canvas id="canvasRadial17" width="240" height="300"></canvas>
                <canvas id="canvasRadial14" width="240" height="300"></canvas>               
            </td>
            
            
        </tr>
        <tr>
            <td width="100%">
                <canvas id="canvasRadial7" width="240" height="240"></canvas>
                <canvas id="canvasRadial8" width="240" height="240"></canvas>
                <canvas id="canvasRadial9" width="240" height="240"></canvas>
                <canvas id="canvasRadial10" width="240" height="240"></canvas> 
                <canvas id="canvasRadial11" width="240" height="240"></canvas>
                <canvas id="canvasRadial12" width="240" height="240"></canvas>
            </td>
        <tr>
           
        </tr>
    </tbody></table>
    <div style="position:absolute; left:1310px; top:20px; ">
      <button onclick="popup()"; style="height:30px;width:125px"> Hoofdmotor  </button><br>
      <button onclick="popup()"; style="height:30px;width:125px"> Tanklevels  </button><br>
      <button onclick="popup()"; style="height:30px;width:125px"> 220/380/24V </button><br>
      <button onclick="popup()"; style="height:30px;width:125px"> Generatoren </button><br>
      <button onclick="popup()"; style="height:30px;width:125px"> Bediening </button><br>
      <button onclick="popup()"; style="height:30px;width:125px"> Alarmen  </button><br>
      <img src="cue.png" style="width:50px;height:50px"; onclick="popup()";>
      <br>
      <select id="comboFrame" onchange="setFrameDesign(this)" style="height:30px;width:125px">
                    <option selected="selected" value="">   Type ring  </option>
                    <option value="BLACK_METAL">BlackMetal</option>
                    <option value="METAL">Metal</option>
                    <option value="SHINY_METAL">ShinyMetal</option>
                    <option value="BRASS">Brass</option>
                    <option value="STEEL">Steel</option>
                    <option value="CHROME">Chrome</option>
                    <option value="GOLD">Gold</option>
                    <option value="ANTHRACITE">Anthracite</option>
                    <option value="TILTED_GRAY">TiltedGray</option>
                    <option value="TILTED_BLACK">TiltedBlack</option>
                    <option value="GLOSSY_METAL">GlossyMetal</option>
                </select>
                <select id="comboBackground" onchange="setBackgroundColor(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">   Kleur achtergrond  </option>
                    <option value="DARK_GRAY">DarkGray</option>
                    <option value="SATIN_GRAY">SatinGray</option>
                    <option value="LIGHT_GRAY">LightGray</option>
                    <option value="WHITE">White</option>
                    <option value="BLACK">Black</option>
                    <option value="BEIGE">Beige</option>
                    <option value="BROWN">Brown</option>
                    <option value="RED">Red</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE">Blue</option>
                    <option value="ANTHRACITE">Anthracite</option>
                    <option value="MUD">Mud</option>
                    <option value="PUNCHED_SHEET">PunchedSheet</option>
                    <option value="CARBON">Carbon</option>
                    <option value="STAINLESS">Stainless</option>
                    <option value="BRUSHED_METAL">BrushedMetal</option>
                    <option value="BRUSHED_STAINLESS">BrushedStainless</option>
                    <option value="TURNED">Turned</option>
                </select>
                <select id="comboPointerColor" onchange="setPointerColor(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">   Kleur naald  </option>
                    <option value="RED">Red</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE">Blue</option>
                    <option value="ORANGE">Orange</option>
                    <option value="YELLOW">Yellow</option>
                    <option value="CYAN">Cyan</option>
                    <option value="MAGENTA">Magenta</option>
                    <option value="WHITE">White</option>
                    <option value="GRAY">Gray</option>
                    <option value="BLACK">Black</option>
                    <option value="RAITH">Raith</option>
                    <option value="GREEN_LCD">Green LCD</option>
                    <option value="JUG_GREEN">JUG Green</option>
                </select>
                <select id="comboPointerType" onchange="setPointerType(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">   Type wijzernaald  </option>
                    <option value="TYPE1">Type1</option>
                    <option value="TYPE2">Type2</option>
                    <option value="TYPE3">Type3</option>
                    <option value="TYPE4">Type4</option>
                    <option value="TYPE5">Type5</option>
                    <option value="TYPE6">Type6</option>
                    <option value="TYPE7">Type7</option>
                    <option value="TYPE8">Type8</option>
                    <option value="TYPE9">Type9</option>
                    <option value="TYPE10">Type10</option>
                    <option value="TYPE11">Type11</option>
                    <option value="TYPE12">Type12</option>
                    <option value="TYPE13">Type13</option>
                    <option value="TYPE14">Type14</option>
                    <option value="TYPE15">Type15</option>
                    <option value="TYPE16">Type16</option>
                </select>
                <select id="comboLcdColor" onchange="setLcdColor(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">  Kleur LCD scherm</option>
                    <option value="BEIGE">Beige</option>
                    <option value="BLUE">Blue</option>
                    <option value="ORANGE">Orange</option>
                    <option value="RED">Red</option>
                    <option value="YELLOW">Yellow</option>
                    <option value="WHITE">White</option>
                    <option value="GRAY">Gray</option>
                    <option value="BLACK">Black</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE2">Blue2</option>
                    <option value="BLUE_BLACK">BlueBlack</option>
                    <option value="BLUE_DARKBLUE">BlueDarkBlue</option>
                    <option value="BLUE_GRAY">BlueGray</option>
                    <option value="STANDARD">Standard</option>
                    <option value="STANDARD_GREEN">StandardGreen</option>
                    <option value="BLUE_BLUE">BlueBlue</option>
                    <option value="RED_DARKRED">RedDarkRed</option>
                    <option value="DARKBLUE">DarkBlue</option>
                    <option value="LILA">Lila</option>
                    <option value="BLACKRED">BlackRed</option>
                    <option value="DARKGREEN">DarkGreen</option>
                    <option value="AMBER">Amber</option>
                    <option value="LIGHTBLUE">LightBlue</option>
                    <option value="SECTIONS">Sections</option>
                </select>
                <select id="comboForeground" onchange="setForegroundType(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">   Type afdekglas    </option>
                    <option value="TYPE1">Type1</option>
                    <option value="TYPE2">Type2</option>
                    <option value="TYPE3">Type3</option>
                    <option value="TYPE4">Type4</option>
                    <option value="TYPE5">Type5</option>
                </select>
      
    </div>

<script>
    var radial1,
        radial2,
        radial3,
        radial4,
        radial5,
        radial6,
        radial7,
        radial8,
        radial9,
        radial10,
        radial11,
        radial12,
        radial13,
        radial14,  
        radial15,
        radial16,
        radial17,
        tempC1=85;
        tempC2=85;
        tempC3=85;
        tempC4=85;
        tempC5=85;
        tempC6=85;
        tempC7=300;
        tempC8=300;
        tempC9=300;
        tempC10=300;
        tempC11=300;
        tempC12=300;
        meter="";
        data_val = 699;
        i=1;
        
        
    function init() {
        // Define some sections
        var sections1 = [steelseries.Section(0, 45, 'rgba(0, 0, 220, 0.3)'),
                        steelseries.Section(45, 65, 'rgba(0, 220, 0, 0.3)'),
                        steelseries.Section(65, 70, 'rgba(220, 220, 0, 0.3)'),
                        steelseries.Section(70, 90, 'rgba(255, 0, 0, 0.3)') ],
        
       
            // Define value gradient for bargraph
            valGrad = new steelseries.gradientWrapper(  0,
                                                        100,
                                                        [ 0, 0.33, 0.66, 0.85, 1],
                                                        [ new steelseries.rgbaColor(0, 0, 200, 1),
                                                          new steelseries.rgbaColor(0, 200, 0, 1),
                                                          new steelseries.rgbaColor(200, 200, 0, 1),
                                                          new steelseries.rgbaColor(200, 0, 0, 1),
                                                          new steelseries.rgbaColor(200, 0, 0, 1) ]);

        // Initialzing gauges
      
        radial1 = new steelseries.Radial('canvasRadial1', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: 'Koelwater',
                            unitString: 'Cil 1',
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });                

        radial2 = new steelseries.Radial('canvasRadial2', {
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: 'Koelwater',
                            unitString: 'Cil 2',
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial3 = new steelseries.Radial('canvasRadial3', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 3",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial4 = new steelseries.Radial('canvasRadial4', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 4",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial5 = new steelseries.Radial('canvasRadial5', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 5",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });
                        
        radial6 = new steelseries.Radial('canvasRadial6', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 6",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        
         radial7 = new steelseries.Radial('canvasRadial7', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: 'Uitlaat',
                            unitString: 'Cil 1',
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial8 = new steelseries.Radial('canvasRadial8', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: 'Uitlaat',
                            unitString: 'Cil 2',
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial9 = new steelseries.Radial('canvasRadial9', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 3",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });

        radial10 = new steelseries.Radial('canvasRadial10', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 4",
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true
                        });

        radial11 = new steelseries.Radial('canvasRadial11', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 5",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                         
                        });
                        
        radial12 = new steelseries.Radial('canvasRadial12', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 6",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
        radial13 = new steelseries.Radial('canvasRadial13', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 240,
                            minValue: 0,
                            maxValue: 35,
                            section: Array(steelseries.Section(0,10,'rgba(255,0,0,0.3)'),steelseries.Section(10,35,'rgba(0,255,0,0.3)')),
                            titleString: "Startlucht",
                            unitString: "Bar",
                            threshold: 10,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                           
         radial14 = new steelseries.Radial('canvasRadial14', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 240,
                            minValue: 0,
                            maxValue: 90,
                            section: Array(steelseries.Section(0,30,'rgba(0,0,255,0.3)'),steelseries.Section(30,60,'rgba(0,255,0,0.3)'),steelseries.Section(60,70,'rgba(255,255,0,0.3)'),steelseries.Section(70,90,'rgba(255,0,0,0.3)')),
                            titleString: "KOPPELING",
                            unitString: "Olie °C ",
                            threshold: 65,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
                    

        radial15 = new steelseries.Radial('canvasRadial15', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            section: Array(steelseries.Section(0,1,'rgba(255,0,0,0.3)'),steelseries.Section(1,1.25,'rgba(255,255,0,0.3)'),steelseries.Section(1.25,2.5,'rgba(0,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            size: 240,
                            minValue: 0,
                            maxValue: 2.5,
                            majorTickSpacing: 0.1,
                            minorTickSpacing: 0.01,
                            labelNumberFormat: steelseries.LabelNumberFormat.FRACTIONAL,
                            thresholdBehaviourInverted: true,
                            //section: sectionsu,
                            titleString: "STORK",
                            unitString: "Oliedruk",
                            threshold: 1,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
       
                            lcdDecimals: 1,
                            lcdVisible: true
                            
                        });

        radial16 = new steelseries.Radial('canvasRadial16', {
                           gaugeType: steelseries.GaugeType.TYPE4,
                            size: 300,
                            minValue: 0,
                            maxValue: 700,
                            section: Array(steelseries.Section(150,520,'rgba(0,255,0,0.3)'),steelseries.Section(520,600,'rgba(255,255,0,0.3)'),steelseries.Section(600,700,'rgba(255,0,0,0.3)')),
                            titleString: "STORK",
                            unitString: "RPM",
                            threshold: 600,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                            
                        });

        radial17 = new steelseries.Radial('canvasRadial17', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            section: Array(steelseries.Section(0,12,'rgba(255,0,0,0.3)'),steelseries.Section(12,15,'rgba(255,255,0,0.3)'),steelseries.Section(15,30,'rgba(0,255,0,0.3)')),
                            size: 240,
                            minValue: 0,
                            maxValue: 30,
                            //section: sectionsu,
                            titleString: "KOPPELING",
                            unitString: "Oliedruk",
                            threshold: 12,
                            lcdDecimals:0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
        
        // Start update
        setTimeout('GetArduinoInputs()', 2500);
        setInterval(function(){ GetArduinoInputs(); }, 900);
        
        setInterval(function(){ radial16.setValueAnimated(data_val); }, 900);
        setInterval(function(){ radial1.setValueAnimated(tempC1); }, 2000);
        setInterval(function(){ radial2.setValueAnimated(tempC2); }, 2000);
        setInterval(function(){ radial3.setValueAnimated(tempC3); }, 2000);
        setInterval(function(){ radial4.setValueAnimated(tempC4); }, 2000);
        setInterval(function(){ radial5.setValueAnimated(tempC5); }, 2000);
        setInterval(function(){ radial6.setValueAnimated(tempC6); }, 2000);
        /*
        setInterval(function(){ radial7.setValueAnimated(tempC1); }, 2000);
        setInterval(function(){ radial8.setValueAnimated(tempC2); }, 2000);
        setInterval(function(){ radial9.setValueAnimated(tempC3); }, 2000);
        setInterval(function(){ radial10.setValueAnimated(tempC4); }, 2000);
        setInterval(function(){ radial11.setValueAnimated(tempC5); }, 2000);
        setInterval(function(){ radial12.setValueAnimated(tempC6); }, 2000);
        setInterval(function(){ radial12.setValueAnimated(tempC14); }, 2000);
        */
        
        
    }
    
    
       function GetArduinoInputs()
		{
			nocache = "&nocache=" + Math.random() * 1000000;
			var request = new XMLHttpRequest();			
			request.onreadystatechange = function()
			{  
				if (request.readyState == 4) {
				
					if (request.status == 200) {

						if (request.responseXML != null) {
							data_val = request.responseXML.getElementsByTagName('rpm')[0].childNodes[0].nodeValue;
							tempC1 = request.responseXML.getElementsByTagName('tc1')[0].childNodes[0].nodeValue;
							tempC2 = request.responseXML.getElementsByTagName('tc2')[0].childNodes[0].nodeValue;
							tempC3 = request.responseXML.getElementsByTagName('tc3')[0].childNodes[0].nodeValue;
							tempC4 = request.responseXML.getElementsByTagName('tc4')[0].childNodes[0].nodeValue;
							tempC5 = request.responseXML.getElementsByTagName('tc5')[0].childNodes[0].nodeValue;
							tempC6 = request.responseXML.getElementsByTagName('tc6')[0].childNodes[0].nodeValue;
						}
						
					}
				}
			}
					
			request.open("GET", "http://192.168.1.176", true);
			request.send(null);
			}
			

    function popup() {
        alert('onder constructie');    
    }

  
    function setFrameDesign(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "BLACK_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.BLACK_METAL);
        		 i++;
        		 }
            break;          
        case "METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.METAL);
        		 i++;
        		 }
            break;           
        case "SHINY_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.SHINY_METAL);
        		 i++;
        		 }
            break;            
        case "BRASS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.BRASS);
        		 i++;
        		 }
            break;            
        case "STEEL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.STEEL);
        		 i++;
        		 }
             break;            
        case "CHROME":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.CHROME);
        		 i++;
        		 }
             break;            
        case "GOLD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.GOLD);
        		 i++;
        		 }
            break;            
        case "ANTHRACITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.ANTHRACITE);
        		 i++;
        		 }
            break;         
        case "TILTED_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.TILTED_GRAY);
        		 i++;
        		 }
            break;            
        case "TILTED_BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.TILTED_BLACK);
        		 i++;
        		 }
           break;           
        case "GLOSSY_METAL":
            i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.GLOSSY_METAL);
        		 i++;
        		 }
            break;
        }
    }

    function setBackgroundColor(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "DARK_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.DARK_GRAY);
        		 i++;
        		 }
           break;          
        case "SATIN_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.SATIN_GRAY);
        		 i++;
        		 }
            break;           
        case "LIGHT_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.LIGHT_GRAY);
        		 i++;
        		 }
            break; 
        case "WHITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.WHITE);
        		 i++;
        		 }
             break;            
        case "BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BLACK);
        		 i++;
        		 }
            break;
        case "BEIGE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BEIGE);
        		 i++;
        		 }
            break;
        case "BROWN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BROWN);
        		 i++;
        		 }
            break;
        case "RED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.RED);
        		 i++;
        		 }
            break;
        case "GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.GREEN);
        		 i++;
        		 }
             break;            
        case "BLUE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BLUE);
        		 i++;
        		 }
            break;
        case "ANTHRACITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.ANTHRACITE);
        		 i++;
        		 }
            break;
        case "MUD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.MUD);
        		 i++;
        		 }
            break;
        case "PUNCHED_SHEET":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.PUNCHED_SHEET);
        		 i++;
        		 }
            break;
        case "CARBON":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.CARBON);
        		 i++;
        		 }
            break;
        case "STAINLESS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.STAINLESS);
        		 i++;
        		 }
            break;
        case "BRUSHED_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BRUSHED_METAL);
        		 i++;
        		 }
            break;
        case "BRUSHED_STAINLESS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BRUSHED_STAINLESS);
        		 i++;
        		 }
             break;
        case "TURNED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.TURNED);
        		 i++;
        		 }
            break;
        }
    }

    function setForegroundType(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "TYPE1":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE1);
        		 i++;
        		 }
            break;
        case "TYPE2":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE2);
        		 i++;
        		 }
            break;
        case "TYPE3":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE3);
        		 i++;
        		 }
            break;
        case "TYPE4":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE4);
        		 i++;
        		 }
            break;
        case "TYPE5":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE5);
        		 i++;
        		 }
            break;
        }
    }

    function setPointerColor(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "RED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.RED);
        		 i++;
        		 }
           break;
        case "GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GREEN);
        		 i++;
        		 }
            break;
        case "BLUE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.BLUE);
        		 i++;
        		 }
            break;
        case "ORANGE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.ORANGE);
        		 i++;
        		 }
            break;
        case "YELLOW":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.YELLOW);
        		 i++;
        		 }
            break;
        case "CYAN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.CYAN);
        		 i++;
        		 }
            break;
        case "MAGENTA":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.MAGENTA);
        		 i++;
        		 }
            break;
        case "WHITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.WHITE);
        		 i++;
        		 }
            break;
        case "GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GRAY);
        		 i++;
        		 }
           break;
        case "BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.BLACK);
        		 i++;
        		 }
             break;
        case "RAITH":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.RAITH);
        		 i++;
        		 }
            break;
        case "GREEN_LCD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GREEN_LCD);
        		 i++;
        		 }
            break;
        case "JUG_GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.JUG_GREEN);
        		 i++;
        		 }
           break;
        }
    }

    function setPointerType(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "TYPE1":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE1);
        		 i++;
        		 }
           break;
         case "TYPE2":
              i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE2);
        		 i++;
        		 }
            break;    
          case "TYPE3":
               i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE3);
        		 i++;
        		 }
            break;
          case "TYPE4":
               i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE4);
        		 i++;
        		 }
           break;
           case "TYPE5":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE5);
        		 i++;
        		 }
            break;
           case "TYPE6":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE6);
        		 i++;
        		 }
             break;
           case "TYPE7":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE7);
        		 i++;
        		 }
            break;
           case "TYPE8":
                i = 1; 
             while(i < 18) {
...

This file has been truncated, please download it to see its full contents.

updated and refined sketch, 7 temp sensors in use,

Arduino
This sketch samples temperatures on 7 points, measures rpm, steers analog rpm meter, and sends measurements in xml to network clients on request
#include <EthernetClient.h>
#include <Ethernet.h>
#include <EthernetServer.h>
#include <SPI.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#define ONE_WIRE_BUS 7
#define REQ_BUF_SZ   500
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
DeviceAddress ts_1 = { 0x28, 0x10, 0x1A, 0x1F, 0x00, 0x00, 0x80, 0xAA };
DeviceAddress ts_2 = { 0x28, 0x38, 0x15, 0x08, 0x00, 0x00, 0x80, 0x6C };
DeviceAddress ts_3 = { 0x28, 0x4C, 0x19, 0x1F, 0x00, 0x00, 0x80, 0xB7 };
DeviceAddress ts_4 = { 0x28, 0xAC, 0x19, 0x08, 0x00, 0x00, 0x80, 0x20 };
DeviceAddress ts_5 = { 0x28, 0x76, 0x1A, 0x1F, 0x00, 0x00, 0x80, 0xDB };
DeviceAddress ts_6 = { 0x28, 0x05, 0x1C, 0x08, 0x00, 0x00, 0x80, 0x38 };
DeviceAddress ts_7 = { 0x28, 0x3E, 0x16, 0x08, 0x00, 0x00, 0x80, 0x90 };

float tempC1 = 0;
float tempC2 = 0;
float tempC3 = 0;
float tempC4 = 0;
float tempC5 = 0;
float tempC6 = 0;
float tempC7 = 0;
float tempC8 = 0;
float tempC9 = 0;
float tempC10 = 0;
float tempC11 = 0;
float tempC12 = 0; 
float tempC14 = 0; 
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xFF};
IPAddress ip( 192, 168, 1, 167);
EthernetServer server(80);

char HTTP_req[REQ_BUF_SZ] = {0};
char req_index = 0;
int analog_val = 0;
unsigned long lastmillis = 0;
int RPM;
int rpm;
int PinVal;
int OldPinVal;
String readString = "";
int counter = 0; 

void setup()
{

  Ethernet.begin(mac, ip);  // initialize Ethernet device
  server.begin();
  sensors.begin();
  Serial.begin(9600);
  delay(300);
  Serial.print("Live !");
}

void loop()
{
  sensors.requestTemperatures();
  // delay(100);
  analog_val = 0;
  lastmillis = millis(); // reset timer voor 0.8 sec timeout
  if (digitalRead(2) == HIGH) { while (digitalRead(2) == HIGH and millis() - lastmillis < 700);{} }
  while (digitalRead(2) == LOW and millis() - lastmillis < 700); {} // wacht op begin passage detector of timeout
  while (digitalRead(2) == HIGH and millis() - lastmillis < 700); {} // wacht op einde passage detector ==> startpunt meting
  lastmillis = millis(); // reset timer voor meting & start chrono
  while (digitalRead(2) == LOW and millis() - lastmillis < 700); {} // wacht op begin passage detector
  while (digitalRead(2) == HIGH and millis() - lastmillis < 700); {} // wacht op einde passage detector ==> eindpunt meting

  if (millis() - lastmillis < 700 ) {
    analog_val = (60000 / (millis() - lastmillis)) ;
  }
  if (millis() - lastmillis > 699) {
    analog_val = 0;  // timed out = toerental 0
  }
  // aansturing toerenteller stuurhuis
 
  RPM = analog_val;
  PinVal = 0;
  if (RPM > 100) {
    PinVal = 16 + ((RPM - 100) * .33);
  }
  if (RPM > 200) {
    PinVal = 49 + ((RPM - 200) * .37);
  }
  if (RPM > 300) {
    PinVal = 86 + ((RPM - 300) * .38);
  }
  // PinVal = conversie van toerental naar waarde voor de output pin
  analogWrite(5, round(PinVal)); // einde aansturing toerenteller stuurhuis

  EthernetClient client = server.available();

  if (client) {
    readString = "";
    boolean currentLineIsBlank = true;

    while (client.connected() || client.available()) {
      char c = client.read(); //gets byte from ethernet buffer
      readString = readString + c;

      if (c == '\n' && currentLineIsBlank) {
        Serial.println(readString);
        // send a standard http response header
        client.println("HTTP/1.1 200 OK");
        client.println("Content-Type: text/xml");
        client.println("Access-Control-Allow-Origin: *");
        client.println();
        // print the current readings, in HTML format:
        client.print("<inputs>");
        client.print("<rpm>");
        client.print(analog_val);
        client.print("</rpm>");
        client.print("<tc1>");
        client.print(sensors.getTempC(ts_1));
        client.print("</tc1>");
        client.print("<tc2>"); 
        client.print(sensors.getTempC(ts_2));
        client.print("</tc2>");
        client.print("<tc3>");
        client.print(sensors.getTempC(ts_3));
        client.print("</tc3>");
        client.print("<tc4>");
        client.print(sensors.getTempC(ts_4));
        client.print("</tc4>");
        client.print("<tc5>");
        client.print(sensors.getTempC(ts_5));
        client.print("</tc5>");
        client.print("<tc6>");
        client.print(sensors.getTempC(ts_6));
        client.print("</tc6>");
        client.print("<tc7>");
        client.print(sensors.getTempC(ts_7));
        client.print("</tc7>");
        client.print("</inputs>");
        client.println();
        break;
      }
      if (c == '\n') {
        // you're starting a new line
        currentLineIsBlank = true;
      } else if (c != '\r') {
        // you've gotten a character on the current line
        currentLineIsBlank = false;
      }

    }
  }
  delay(50);
  client.stop();
  while (client.status() != 0) delay(50);
}

My dashboard updated version

HTML
This webpage displays a series of gauges (designed by Gerrit Grunwald) , it requests data from the arduino, the response is an xml file. The gauges are updated with the data in the xml.
Updated version, 1K lines less code !!
<!DOCTYPE html>
<html><head>
    <meta http-equiv="content-type" content="text/html; charset=UTF-8">
    <meta charset="utf-8">
    <title>Lorenzo Online Instruments</title>
    
</head>
<body onload="init();" style="background-color:#020d1e">
    <table>
        <tbody>
                
        <tr>
            <td width="100%">
                <canvas id="canvasRadial1" width="210" height="210">No canvas in your browser...sorry...</canvas>
                <canvas id="canvasRadial2" width="210" height="210"></canvas>
                <canvas id="canvasRadial3" width="210" height="210"></canvas>
                <canvas id="canvasRadial4" width="210" height="210"></canvas> 
                <canvas id="canvasRadial5" width="210" height="210"></canvas>
                <canvas id="canvasRadial6" width="210" height="210"></canvas>
            </td>
        </tr>
        <tr>
            <td width="100%">
                <canvas id="canvasRadial13" width="240" height="240"></canvas>
                <canvas id="canvasRadial15" width="240" height="240"></canvas>
                <canvas id="canvasRadial16" width="300" height="300"></canvas>
                <canvas id="canvasRadial17" width="240" height="240"></canvas>
                <canvas id="canvasRadial14" width="240" height="240"></canvas>               
            </td>
            
            
        </tr>
        <tr>
            <td width="100%">
                <canvas id="canvasRadial7" width="210" height="210"></canvas>
                <canvas id="canvasRadial8" width="210" height="210"></canvas>
                <canvas id="canvasRadial9" width="210" height="210"></canvas>
                <canvas id="canvasRadial10" width="210" height="210"></canvas> 
                <canvas id="canvasRadial11" width="210" height="210"></canvas>
                <canvas id="canvasRadial12" width="210" height="210"></canvas>
            </td>
        </tr><tr>
           
        </tr>
    </tbody></table>
    <div style="position:absolute; left:1310px; top:20px; ">
      <button onclick="popup()" ;="" style="height:30px;width:125px"> Hoofdmotor  </button><br>
      <button onclick="popup()" ;="" style="height:30px;width:125px"> Tanklevels  </button><br>
      <button onclick="popup()" ;="" style="height:30px;width:125px"> 220/380/24V </button><br>
      <button onclick="popup()" ;="" style="height:30px;width:125px"> Generatoren </button><br>
      <button onclick="popup()" ;="" style="height:30px;width:125px"> Bediening </button><br>
      <button onclick="popup()" ;="" style="height:30px;width:125px"> Alarmen  </button><br>
      <img src="Canvas%20Steel_bestanden/cue.png" style="width:50px;height:50px" ;="" onclick="popup()">
      <br>
      <select id="comboFrame" onchange="setFrameDesign(this)" style="height:30px;width:125px">
                    <option value="">   Type ring  </option>
                    <option value="BLACK_METAL">BlackMetal</option>
                    <option value="METAL">Metal</option>
                    <option value="SHINY_METAL" selected="selected">ShinyMetal</option>
                    <option value="BRASS">Brass</option>
                    <option value="STEEL">Steel</option>
                    <option value="CHROME">Chrome</option>
                    <option value="GOLD">Gold</option>
                    <option value="ANTHRACITE">Anthracite</option>
                    <option value="TILTED_GRAY">TiltedGray</option>
                    <option value="TILTED_BLACK">TiltedBlack</option>
                    <option value="GLOSSY_METAL">GlossyMetal</option>
                </select>
                <select id="comboBackground" onchange="setBackgroundColor(this);" style="height:30px;width:125px">
                    <option value="">   Kleur achtergrond  </option>
                    <option value="DARK_GRAY">DarkGray</option>
                    <option value="SATIN_GRAY">SatinGray</option>
                    <option value="LIGHT_GRAY">LightGray</option>
                    <option value="WHITE">White</option>
                    <option value="BLACK">Black</option>
                    <option value="BEIGE">Beige</option>
                    <option value="BROWN">Brown</option>
                    <option value="RED">Red</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE" selected="selected">Blue</option>
                    <option value="ANTHRACITE">Anthracite</option>
                    <option value="MUD">Mud</option>
                    <option value="PUNCHED_SHEET">PunchedSheet</option>
                    <option value="CARBON">Carbon</option>
                    <option value="STAINLESS">Stainless</option>
                    <option value="BRUSHED_METAL">BrushedMetal</option>
                    <option value="BRUSHED_STAINLESS">BrushedStainless</option>
                    <option value="TURNED">Turned</option>
                </select>
                <select id="comboPointerColor" onchange="setPointerColor(this);" style="height:30px;width:125px">
                    <option selected="selected" value="">   Kleur naald  </option>
                    <option value="RED">Red</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE">Blue</option>
                    <option value="ORANGE">Orange</option>
                    <option value="YELLOW">Yellow</option>
                    <option value="CYAN">Cyan</option>
                    <option value="MAGENTA">Magenta</option>
                    <option value="WHITE">White</option>
                    <option value="GRAY">Gray</option>
                    <option value="BLACK">Black</option>
                    <option value="RAITH">Raith</option>
                    <option value="GREEN_LCD">Green LCD</option>
                    <option value="JUG_GREEN">JUG Green</option>
                </select>
                <select id="comboPointerType" onchange="setPointerType(this);" style="height:30px;width:125px">
                    <option value="">   Type wijzernaald  </option>
                    <option value="TYPE1">Type1</option>
                    <option value="TYPE2">Type2</option>
                    <option value="TYPE3">Type3</option>
                    <option value="TYPE4">Type4</option>
                    <option value="TYPE5">Type5</option>
                    <option value="TYPE6" selected="selected">Type6</option>
                    <option value="TYPE7">Type7</option>
                    <option value="TYPE8">Type8</option>
                    <option value="TYPE9">Type9</option>
                    <option value="TYPE10">Type10</option>
                    <option value="TYPE11">Type11</option>
                    <option value="TYPE12">Type12</option>
                    <option value="TYPE13">Type13</option>
                    <option value="TYPE14">Type14</option>
                    <option value="TYPE15">Type15</option>
                    <option value="TYPE16">Type16</option>
                </select>
                <select id="comboLcdColor" onchange="setLcdColor(this);" style="height:30px;width:125px">
                    <option value="">  Kleur LCD scherm</option>
                    <option value="BEIGE">Beige</option>
                    <option value="BLUE">Blue</option>
                    <option value="ORANGE">Orange</option>
                    <option value="RED">Red</option>
                    <option value="YELLOW">Yellow</option>
                    <option value="WHITE">White</option>
                    <option value="GRAY">Gray</option>
                    <option value="BLACK">Black</option>
                    <option value="GREEN">Green</option>
                    <option value="BLUE2">Blue2</option>
                    <option value="BLUE_BLACK" selected="selected">BlueBlack</option>
                    <option value="BLUE_DARKBLUE">BlueDarkBlue</option>
                    <option value="BLUE_GRAY">BlueGray</option>
                    <option value="STANDARD">Standard</option>
                    <option value="STANDARD_GREEN">StandardGreen</option>
                    <option value="BLUE_BLUE">BlueBlue</option>
                    <option value="RED_DARKRED">RedDarkRed</option>
                    <option value="DARKBLUE">DarkBlue</option>
                    <option value="LILA">Lila</option>
                    <option value="BLACKRED">BlackRed</option>
                    <option value="DARKGREEN">DarkGreen</option>
                    <option value="AMBER">Amber</option>
                    <option value="LIGHTBLUE">LightBlue</option>
                    <option value="SECTIONS">Sections</option>
                </select>
                <select id="comboForeground" onchange="setForegroundType(this);" style="height:30px;width:125px">
                    <option value="">   Type afdekglas    </option>
                    <option value="TYPE1">Type1</option>
                    <option value="TYPE2">Type2</option>
                    <option value="TYPE3">Type3</option>
                    <option value="TYPE4" selected="selected">Type4</option>
                    <option value="TYPE5">Type5</option>
                </select>
      
    </div>

<script>
    var radial1,
        radial2,
        radial3,
        radial4,
        radial5,
        radial6,
        radial7,
        radial8,
        radial9,
        radial10,
        radial11,
        radial12,
        radial13,
        radial14,  
        radial15,
        radial16,
        radial17,
        tempC1=85;
        tempC2=85;
        tempC3=85;
        tempC4=85;
        tempC5=85;
        tempC6=85;
        tempC7=300;
        tempC8=300;
        tempC9=300;
        tempC10=300;
        tempC11=300;
        tempC12=300;
        tempC14=85;
        meter="";
        data_val = 699;
        i=1;
        
        
    function init() {
        // Define some sections
        var sections1 = [steelseries.Section(0, 45, 'rgba(0, 0, 220, 0.3)'),
                        steelseries.Section(45, 65, 'rgba(0, 220, 0, 0.3)'),
                        steelseries.Section(65, 70, 'rgba(220, 220, 0, 0.3)'),
                        steelseries.Section(70, 90, 'rgba(255, 0, 0, 0.3)') ],
        
       
            // Define value gradient for bargraph
            valGrad = new steelseries.gradientWrapper(  0,
                                                        100,
                                                        [ 0, 0.33, 0.66, 0.85, 1],
                                                        [ new steelseries.rgbaColor(0, 0, 200, 1),
                                                          new steelseries.rgbaColor(0, 200, 0, 1),
                                                          new steelseries.rgbaColor(200, 200, 0, 1),
                                                          new steelseries.rgbaColor(200, 0, 0, 1),
                                                          new steelseries.rgbaColor(200, 0, 0, 1) ]);

        // Initialzing gauges
      
        radial1 = new steelseries.Radial('canvasRadial1', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: 'Koelwater',
                            unitString: 'Cil 1',
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });                

        radial2 = new steelseries.Radial('canvasRadial2', {
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: 'Koelwater',
                            unitString: 'Cil 2',
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial3 = new steelseries.Radial('canvasRadial3', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 3",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial4 = new steelseries.Radial('canvasRadial4', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 4",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial5 = new steelseries.Radial('canvasRadial5', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 5",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });
                        
        radial6 = new steelseries.Radial('canvasRadial6', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 90,
                            section: sections1,
                            titleString: "Koelwater",
                            unitString: "Cil 6",
                            threshold: 70,
                            lcdDecimals: 1,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        
         radial7 = new steelseries.Radial('canvasRadial7', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: 'Uitlaat',
                            unitString: 'Cil 1',
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial8 = new steelseries.Radial('canvasRadial8', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: 'Uitlaat',
                            unitString: 'Cil 2',
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL
                            
                        });

        radial9 = new steelseries.Radial('canvasRadial9', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 3",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });

        radial10 = new steelseries.Radial('canvasRadial10', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 4",
                            threshold: 310,
                            lcdDecimals: 0,
                            lcdVisible: true
                        });

        radial11 = new steelseries.Radial('canvasRadial11', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 5",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                         
                        });
                        
        radial12 = new steelseries.Radial('canvasRadial12', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 210,
                            minValue: 0,
                            maxValue: 350,
                            section: Array(steelseries.Section(0,120,'rgba(0,0,255,0.3)'),steelseries.Section(120,250,'rgba(0,255,0,0.3)'),steelseries.Section(250,300,'rgba(255,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            titleString: "Uitlaat",
                            unitString: "Cil 6",
                            threshold: 310,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
        radial13 = new steelseries.Radial('canvasRadial13', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 240,
                            minValue: 0,
                            maxValue: 35,
                            section: Array(steelseries.Section(0,10,'rgba(255,0,0,0.3)'),steelseries.Section(10,35,'rgba(0,255,0,0.3)')),
                            titleString: "Startlucht",
                            unitString: "Bar",
                            threshold: 10,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                           
         radial14 = new steelseries.Radial('canvasRadial14', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            size: 240,
                            minValue: 0,
                            maxValue: 90,
                            section: Array(steelseries.Section(0,30,'rgba(0,0,255,0.3)'),steelseries.Section(30,60,'rgba(0,255,0,0.3)'),steelseries.Section(60,70,'rgba(255,255,0,0.3)'),steelseries.Section(70,90,'rgba(255,0,0,0.3)')),
                            titleString: "KOPPELING",
                            unitString: "Olie C ",
                            threshold: 65,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
                    

        radial15 = new steelseries.Radial('canvasRadial15', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            section: Array(steelseries.Section(0,1,'rgba(255,0,0,0.3)'),steelseries.Section(1,1.25,'rgba(255,255,0,0.3)'),steelseries.Section(1.25,2.5,'rgba(0,255,0,0.3)'),steelseries.Section(300,350,'rgba(255,0,0,0.3)')),
                            size: 240,
                            minValue: 0,
                            maxValue: 2.5,
                            majorTickSpacing: 0.1,
                            minorTickSpacing: 0.01,
                            labelNumberFormat: steelseries.LabelNumberFormat.FRACTIONAL,
                            thresholdBehaviourInverted: true,
                            //section: sectionsu,
                            titleString: "STORK",
                            unitString: "Oliedruk",
                            threshold: 1,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
       
                            lcdDecimals: 1,
                            lcdVisible: true
                            
                        });

        radial16 = new steelseries.Radial('canvasRadial16', {
                           gaugeType: steelseries.GaugeType.TYPE4,
                            size: 300,
                            minValue: 0,
                            maxValue: 700,
                            section: Array(steelseries.Section(150,520,'rgba(0,255,0,0.3)'),steelseries.Section(520,600,'rgba(255,255,0,0.3)'),steelseries.Section(600,700,'rgba(255,0,0,0.3)')),
                            titleString: "STORK",
                            unitString: "RPM",
                            threshold: 600,
                            lcdDecimals: 0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                            
                        });

        radial17 = new steelseries.Radial('canvasRadial17', {
                            gaugeType: steelseries.GaugeType.TYPE4,
                            section: Array(steelseries.Section(0,12,'rgba(255,0,0,0.3)'),steelseries.Section(12,15,'rgba(255,255,0,0.3)'),steelseries.Section(15,30,'rgba(0,255,0,0.3)')),
                            size: 240,
                            minValue: 0,
                            maxValue: 30,
                            //section: sectionsu,
                            titleString: "KOPPELING",
                            unitString: "Oliedruk",
                            threshold: 12,
                            lcdDecimals:0,
                            tickLabelOrientation: steelseries.TickLabelOrientation.HORIZONTAL,
                            
                            lcdVisible: true
                        });
                        
        
        // Start update
        setTimeout('GetArduinoInputs()', 5000);
        setInterval(function(){ GetArduinoInputs(); }, 1000);
        
        setInterval(function(){ radial16.setValueAnimated(data_val); }, 1000);
        setInterval(function(){ radial1.setValueAnimated(tempC1); }, 2000);
        setInterval(function(){ radial2.setValueAnimated(tempC2); }, 2000);
        setInterval(function(){ radial3.setValueAnimated(tempC3); }, 2000);
        setInterval(function(){ radial4.setValueAnimated(tempC4); }, 2000);
        setInterval(function(){ radial5.setValueAnimated(tempC5); }, 2000);
        setInterval(function(){ radial6.setValueAnimated(tempC6); }, 2000);
        setInterval(function(){ radial14.setValueAnimated(tempC7); }, 2000);
        /*
        
        setInterval(function(){ radial8.setValueAnimated(tempC8); }, 2000);
        setInterval(function(){ radial9.setValueAnimated(tempC9); }, 2000);
        setInterval(function(){ radial10.setValueAnimated(tempC10); }, 2000);
        setInterval(function(){ radial11.setValueAnimated(tempC11); }, 2000);
        setInterval(function(){ radial12.setValueAnimated(tempC12); }, 2000);
        setInterval(function(){ radial14.setValueAnimated(tempC14); }, 2000);
        */
        
       
    }
    
    
       function GetArduinoInputs()
		{
			nocache = "&nocache=" + Math.random() * 1000000;
			var request = new XMLHttpRequest();			
			request.onreadystatechange = function()
			{  
				if (request.readyState == 4) {
				
					if (request.status == 200) {

						if (request.responseXML != null) {
							data_val = request.responseXML.getElementsByTagName('rpm')[0].childNodes[0].nodeValue;
							tempC1 = request.responseXML.getElementsByTagName('tc1')[0].childNodes[0].nodeValue;
							tempC2 = request.responseXML.getElementsByTagName('tc2')[0].childNodes[0].nodeValue;
							tempC3 = request.responseXML.getElementsByTagName('tc3')[0].childNodes[0].nodeValue;
							tempC4 = request.responseXML.getElementsByTagName('tc4')[0].childNodes[0].nodeValue;
							tempC5 = request.responseXML.getElementsByTagName('tc5')[0].childNodes[0].nodeValue;
							tempC6 = request.responseXML.getElementsByTagName('tc6')[0].childNodes[0].nodeValue;
							tempC7 = request.responseXML.getElementsByTagName('tc7')[0].childNodes[0].nodeValue;
						}
						
					}
				}
			}
					
			request.open("GET", "http://192.168.1.167", true);
			request.send(null);
			}
			

    function popup() {
        alert('onder constructie');    
    }

  
    function setFrameDesign(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "BLACK_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.BLACK_METAL);
        		 i++;
        		 }
            break;          
        case "METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.METAL);
        		 i++;
        		 }
            break;           
        case "SHINY_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.SHINY_METAL);
        		 i++;
        		 }
            break;            
        case "BRASS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.BRASS);
        		 i++;
        		 }
            break;            
        case "STEEL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.STEEL);
        		 i++;
        		 }
             break;            
        case "CHROME":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.CHROME);
        		 i++;
        		 }
             break;            
        case "GOLD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.GOLD);
        		 i++;
        		 }
            break;            
        case "ANTHRACITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.ANTHRACITE);
        		 i++;
        		 }
            break;         
        case "TILTED_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.TILTED_GRAY);
        		 i++;
        		 }
            break;            
        case "TILTED_BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.TILTED_BLACK);
        		 i++;
        		 }
           break;           
        case "GLOSSY_METAL":
            i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setFrameDesign(steelseries.FrameDesign.GLOSSY_METAL);
        		 i++;
        		 }
            break;
        }
    }

    function setBackgroundColor(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "DARK_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.DARK_GRAY);
        		 i++;
        		 }
           break;          
        case "SATIN_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.SATIN_GRAY);
        		 i++;
        		 }
            break;           
        case "LIGHT_GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.LIGHT_GRAY);
        		 i++;
        		 }
            break; 
        case "WHITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.WHITE);
        		 i++;
        		 }
             break;            
        case "BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BLACK);
        		 i++;
        		 }
            break;
        case "BEIGE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BEIGE);
        		 i++;
        		 }
            break;
        case "BROWN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BROWN);
        		 i++;
        		 }
            break;
        case "RED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.RED);
        		 i++;
        		 }
            break;
        case "GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.GREEN);
        		 i++;
        		 }
             break;            
        case "BLUE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BLUE);
        		 i++;
        		 }
            break;
        case "ANTHRACITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.ANTHRACITE);
        		 i++;
        		 }
            break;
        case "MUD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.MUD);
        		 i++;
        		 }
            break;
        case "PUNCHED_SHEET":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.PUNCHED_SHEET);
        		 i++;
        		 }
            break;
        case "CARBON":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.CARBON);
        		 i++;
        		 }
            break;
        case "STAINLESS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.STAINLESS);
        		 i++;
        		 }
            break;
        case "BRUSHED_METAL":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BRUSHED_METAL);
        		 i++;
        		 }
            break;
        case "BRUSHED_STAINLESS":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.BRUSHED_STAINLESS);
        		 i++;
        		 }
             break;
        case "TURNED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setBackgroundColor(steelseries.BackgroundColor.TURNED);
        		 i++;
        		 }
            break;
        }
    }

    function setForegroundType(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "TYPE1":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE1);
        		 i++;
        		 }
            break;
        case "TYPE2":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE2);
        		 i++;
        		 }
            break;
        case "TYPE3":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE3);
        		 i++;
        		 }
            break;
        case "TYPE4":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE4);
        		 i++;
        		 }
            break;
        case "TYPE5":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setForegroundType(steelseries.ForegroundType.TYPE5);
        		 i++;
        		 }
            break;
        }
    }

    function setPointerColor(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "RED":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.RED);
        		 i++;
        		 }
           break;
        case "GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GREEN);
        		 i++;
        		 }
            break;
        case "BLUE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.BLUE);
        		 i++;
        		 }
            break;
        case "ORANGE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.ORANGE);
        		 i++;
        		 }
            break;
        case "YELLOW":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.YELLOW);
        		 i++;
        		 }
            break;
        case "CYAN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.CYAN);
        		 i++;
        		 }
            break;
        case "MAGENTA":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.MAGENTA);
        		 i++;
        		 }
            break;
        case "WHITE":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.WHITE);
        		 i++;
        		 }
            break;
        case "GRAY":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GRAY);
        		 i++;
        		 }
           break;
        case "BLACK":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.BLACK);
        		 i++;
        		 }
             break;
        case "RAITH":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.RAITH);
        		 i++;
        		 }
            break;
        case "GREEN_LCD":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.GREEN_LCD);
        		 i++;
        		 }
            break;
        case "JUG_GREEN":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerColor(steelseries.ColorDef.JUG_GREEN);
        		 i++;
        		 }
           break;
        }
    }

    function setPointerType(sel) {
        switch (sel.options[sel.selectedIndex].value) {
        case "TYPE1":
             i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE1);
        		 i++;
        		 }
           break;
         case "TYPE2":
              i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE2);
        		 i++;
        		 }
            break;    
          case "TYPE3":
               i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE3);
        		 i++;
        		 }
            break;
          case "TYPE4":
               i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE4);
        		 i++;
        		 }
           break;
           case "TYPE5":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE5);
        		 i++;
        		 }
            break;
           case "TYPE6":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE6);
        		 i++;
        		 }
             break;
           case "TYPE7":
                i = 1; 
             while(i < 18) {
        		 meter = "radial" + i; 
        		 eval(meter).setPointerType(steelseries.PointerType.TYPE7);
        		 i++;
        		 }
            break;
           case "TYPE8":
...

This file has been truncated, please download it to see its full contents.

Credits

eric

eric

1 project • 28 followers

Comments