shaqibmusa94
Published

Multifunctional Watch With Arduino Uno

This watch includes temperature reading, timer and alarm functions.

IntermediateShowcase (no instructions)14 days4,661
Multifunctional Watch With Arduino Uno

Things used in this project

Story

Read more

Schematics

Circuit diagram of the watch

Code

Codes for Multifunctional Watch

C/C++
I'm totally beginner to C programming language,so this is really beginner's codes,long codes,but the most important it works as what i want ! Yeah i copied some codes from other's project,but that is how we learn coding right.xoxo.Total time for coding and research are about 30 hours.And you need the libraries for RTC,Button and LCD.You can find it at github.com
#include <LiquidCrystal.h>      //  
#include <Button.h>             //  
#include <DS3231.h>             //  RTC

int buzzer = 13;                                                //set  .   13
uint8_t hh = 0, mm = 0, ss = 0;                                 //set  ,, RTC
uint8_t timerMode = 0 ,setMode=0, setAlarm=0, alarmMode=0 ;     //set    
uint8_t alarmHH =0 ,alarmMM =0 ,alarmSS=0;                      //   
uint8_t timerhh=0, timermm=0, timerss =0;                       //   
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);                          // LCD 
DS3231 rtc(SDA,SCL);                                            // RTC
Time t;                                                         //    t

#define DN_PIN 7                                                  //set  pin
#define UP_PIN 8                                                  //set  pin
#define SET_PIN 9                                                 //set  
#define ALR_PIN 10                                                //set   
#define PULLUP true                                               //aktifkan  
#define INVERT true                                               //If invert ==true,HIGH=released,LOW=pressed
#define DEBOUNCE_MS 20                                            //state  react with button
#define REPEAT_FIRST 500                                          //state  untuk tekan berapa lama button
#define REPEAT_INCR 100                                           // increase kan number

//Declare push buttons
Button btnDN(DN_PIN, PULLUP, INVERT, DEBOUNCE_MS);                //set 1st button utk decrement
Button btnUP(UP_PIN, PULLUP, INVERT, DEBOUNCE_MS);                //set 2nd button utk increment
Button btnSET(SET_PIN, PULLUP, INVERT, DEBOUNCE_MS);              //set button utk function timer
Button btnALR(ALR_PIN, PULLUP, INVERT, DEBOUNCE_MS);              //set button utk function alarm

enum {WAIT, INCR, DECR};                                          //The possible states for the state machine
uint8_t STATE;                                                    //The current state machine state
int count;                                                        //The number that is adjusted
int lastCount = -1;                                               //Previous value of count (initialized to ensure it's different when the sketch starts)
unsigned long rpt = REPEAT_FIRST;                                 //A variable time that is used to drive the repeats for long presses



void setup() {
  
Serial.begin(9600);
lcd.begin(16,2);
pinMode(buzzer,OUTPUT);
rtc.begin();
lcd.setCursor(0,0);
lcd.print("Welcome Shaqib!");
delay(2000);
lcd.clear();
//rtc.setTime(12,24,00);

}

void loop() {

t=rtc.getTime();
hh=t.hour,DEC;
mm=t.min,DEC;
ss=t.sec,DEC;

btnSET.read();
btnUP.read();                             
btnDN.read();
btnALR.read();

if(setMode==0 && setAlarm==0 ){
tunjukJamTemp();
tunjukTimer();}

if(setMode!=0 && setAlarm==0 && alarmMode==0 ){delay(100);}
if(setMode==1 && setAlarm==0 && alarmMode==0 ){lcd.setCursor(7,1);lcd.print("  ");delay(100);tunjukJamTemp();tunjukTimer();}
if(setMode==2 && setAlarm==0 && alarmMode==0 ){lcd.setCursor(10,1);lcd.print("  ");delay(100);tunjukJamTemp();tunjukTimer();}
if(setMode==3 && setAlarm==0 && alarmMode==0 ){lcd.setCursor(13,1);lcd.print("  ");delay(100);tunjukJamTemp();tunjukTimer();}
if(setMode==4 && setAlarm==0 && alarmMode==0 ){tunjukJamTemp();tunjukTimer();stepDown();delay(1000);}



if(setMode==0 && setAlarm!=0 && alarmMode==0 ){delay(100);}
if(setMode==0 && setAlarm==2 && alarmMode==0 ){lcd.setCursor(0,0);lcd.print("  ");delay(100);    lcd.setCursor(0,0);
    if(alarmHH<10){lcd.print("0");}
    lcd.print(alarmHH);lcd.print(":");
    if(alarmMM<10){lcd.print("0");}
    lcd.print(alarmMM);lcd.print(":");
    if(alarmSS<10){lcd.print("0");}
    lcd.print(alarmSS);lcd.setCursor(0,1);
    lcd.print("Set Your Alarm");}
if(setMode==0 && setAlarm==3 && alarmMode==0 ){lcd.setCursor(3,0);lcd.print("  ");delay(100);    lcd.setCursor(0,0);
    if(alarmHH<10){lcd.print("0");}
    lcd.print(alarmHH);lcd.print(":");
    if(alarmMM<10){lcd.print("0");}
    lcd.print(alarmMM);lcd.print(":");
    if(alarmSS<10){lcd.print("0");}
    lcd.print(alarmSS);lcd.setCursor(0,1);
    lcd.print("Set Your Alarm");}
if(setMode==0 && setAlarm==4 && alarmMode==0 ){lcd.setCursor(6,0);lcd.print("  ");delay(100);    lcd.setCursor(0,0);
    if(alarmHH<10){lcd.print("0");}
    lcd.print(alarmHH);lcd.print(":");
    if(alarmMM<10){lcd.print("0");}
    lcd.print(alarmMM);lcd.print(":");
    if(alarmSS<10){lcd.print("0");}
    lcd.print(alarmSS);lcd.setCursor(0,1);
    lcd.print("Set Your Alarm");}
if(setMode==0 && setAlarm==5 && alarmMode==0 ){alarmMode=1;setAlarm=0;}

setupAlarm();
Alarm(alarmHH,alarmMM);

btnSET.read();
btnUP.read();                             
btnDN.read();
btnALR.read();


switch (STATE) {
        
        case WAIT:                            
            if (btnSET.wasPressed())
               { setMode = setMode+1;}
            if (btnALR.wasPressed())
               { setAlarm = setAlarm+1;} 
            if (btnUP.wasPressed())
                STATE = INCR;
            else if (btnDN.wasPressed())
                STATE = DECR;
            else if (btnUP.wasReleased())    
                rpt = REPEAT_FIRST;
            else if (btnDN.wasReleased())
                rpt = REPEAT_FIRST;
            else if (btnUP.pressedFor(rpt)) {  
                rpt += REPEAT_INCR;            
                STATE = INCR;
            }
            else if (btnDN.pressedFor(rpt)) {
                rpt += REPEAT_INCR;
                STATE = DECR;
            }
            break;

        case INCR:                               
            if (setMode==1 && setAlarm==0 && alarmMode==0 && timerhh<23)timerhh=timerhh+1; 
            if (setMode==2 && setAlarm==0 && alarmMode==0 && timermm<59)timermm=timermm+1;
            if (setMode==3 && setAlarm==0 && alarmMode==0 && timerss<59)timerss=timerss+1;
            if (setMode==0 && setAlarm==2 && alarmMode==0 && alarmHH<23)alarmHH=alarmHH+1;
            if (setMode==0 && setAlarm==3 && alarmMode==0 && alarmMM<59)alarmMM=alarmMM+1;
            if (setMode==0 && setAlarm==4 && alarmMode==0 && alarmSS<59)alarmSS=alarmSS+1;
            STATE = WAIT;
            break;

        case DECR:                               
            if (setMode==1 && setAlarm==0 && alarmMode==0 && timerhh>0)timerhh=timerhh-1; 
            if (setMode==2 && setAlarm==0 && alarmMode==0 && timermm>0)timermm=timermm-1;
            if (setMode==3 && setAlarm==0 && alarmMode==0 && timerss>0)timerss=timerss-1;
            if (setMode==0 && setAlarm==2 && alarmMode==0 && alarmHH>0)alarmHH=alarmHH-1;
            if (setMode==0 && setAlarm==3 && alarmMode==0 && alarmMM>0)alarmMM=alarmMM-1;
            if (setMode==0 && setAlarm==4 && alarmMode==0 && alarmSS>0)alarmSS=alarmSS-1;
            STATE = WAIT;
            break;
    }
}

 void stepDown() {
 if (timerss > 0) {
 timerss -= 1;
 } else {
 if (timermm > 0) {
 timerss = 59;
 timermm -= 1;
 } else {
 if (timerhh > 0) {
 timerss = 59;
 timermm = 59;
 timerhh -= 1;
 } else {
  for(int i=0;i<30;i++){
lcd.setCursor(0,0);
lcd.print(rtc.getTimeStr());
lcd.setCursor(10,0);
lcd.print(rtc.getTemp());
lcd.print("C");
btnSET.read();
if(btnSET.wasPressed()){digitalWrite(buzzer,LOW);i=30;}else{
digitalWrite(buzzer,HIGH);
delay(500);
digitalWrite(buzzer,LOW);
delay(500);}
}
setMode=0;

  }
 }
 }
 }
 
void tunjukTimer(){
lcd.setCursor(0, 1);
 lcd.print("Timer:");
 lcd.print(" ");
 (timerhh < 10) ? lcd.print("0") : NULL;
 lcd.print(timerhh);
 lcd.print(":");
 (timermm < 10) ? lcd.print("0") : NULL;
 lcd.print(timermm);
 lcd.print(":");
 (timerss < 10) ? lcd.print("0") : NULL;
 lcd.print(timerss);
   }

void tunjukJamTemp(){
  lcd.setCursor(0,0);
lcd.print(rtc.getTimeStr());
lcd.setCursor(10,0);
lcd.print(rtc.getTemp());
lcd.print("C");

}

void Alarm(uint8_t alarmHH,uint8_t alarmMM){
  if(alarmMode==1 && alarmHH==hh && alarmMM==mm){
   for(int i=0;i<30;i++){
lcd.setCursor(0,0);
lcd.print(rtc.getTimeStr());
lcd.setCursor(10,0);
lcd.print(rtc.getTemp());
lcd.print("C");
lcd.setCursor(0, 1);
 lcd.print("Timer:");
 lcd.print(" ");
 (timerhh < 10) ? lcd.print("0") : NULL;
 lcd.print(timerhh);
 lcd.print(":");
 (timermm < 10) ? lcd.print("0") : NULL;
 lcd.print(timermm);
 lcd.print(":");
 (timerss < 10) ? lcd.print("0") : NULL;
 lcd.print(timerss);
 
btnALR.read();
if(btnALR.wasPressed()){digitalWrite(buzzer,LOW);i=30;}else{
digitalWrite(buzzer,HIGH);
delay(500);
digitalWrite(buzzer,LOW);
delay(500);}
    }
    alarmMode=0;
    setAlarm=0;
  }}

void setupAlarm(){
  if(setMode==0 && setAlarm==1 && alarmMode==0 ){
    lcd.clear();
    lcd.setCursor(0,1);
    lcd.print("Set Your Alarm");
    lcd.setCursor(0,0);
    if(alarmHH<10){lcd.print("0");}
    lcd.print(alarmHH);lcd.print(":");
    if(alarmMM<10){lcd.print("0");}
    lcd.print(alarmMM);lcd.print(":");
    if(alarmSS<10){lcd.print("0");}
    lcd.print(alarmSS);
  }
}

Credits

shaqibmusa94

shaqibmusa94

1 project • 1 follower

Comments