Ruchir Sharma
Published © GPL3+

How to Interface GPS Module (NEO-6m) with Arduino

In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.

BeginnerFull instructions provided1 hour298,329
How to Interface GPS Module (NEO-6m) with Arduino

Things used in this project

Story

Read more

Schematics

Arduino_GPS

Arduino_GPS_GSM

Prefer to give 12 V supply to the GSM

Code

Arduino code

Arduino
#include <LiquidCrystal.h>
#include <SoftwareSerial.h>
#include <TinyGPS.h>
//long   lat,lon; // create variable for latitude and longitude object
float lat = 28.5458,lon = 77.1703; // create variable for latitude and longitude object 
SoftwareSerial gpsSerial(3,4);//rx,tx
LiquidCrystal lcd(A0,A1,A2,A3,A4,A5);
TinyGPS gps; // create gps object
void setup(){
Serial.begin(9600); // connect serial
//Serial.println("The GPS Received Signal:");
gpsSerial.begin(9600); // connect gps sensor
lcd.begin(16,2);
}
 
void loop(){
    while(gpsSerial.available()){ // check for gps data
    if(gps.encode(gpsSerial.read()))// encode gps data
    { 
    gps.f_get_position(&lat,&lon); // get latitude and longitude
    // display position
    lcd.clear();
    lcd.setCursor(1,0);
    lcd.print("GPS Signal");
    //Serial.print("Position: ");
    //Serial.print("Latitude:");
    //Serial.print(lat,6);
    //Serial.print(";");
    //Serial.print("Longitude:");
    //Serial.println(lon,6); 
    lcd.setCursor(1,0);
    lcd.print("LAT:");
    lcd.setCursor(5,0);
    lcd.print(lat);
    //Serial.print(lat);
    //Serial.print(" ");
    
    lcd.setCursor(0,1);
    lcd.print(",LON:");
    lcd.setCursor(5,1);
    lcd.print(lon);
    
   }
  }
  
  String latitude = String(lat,6);
    String longitude = String(lon,6);
  Serial.println(latitude+";"+longitude);
  delay(1000);
  
}

Credits

Ruchir Sharma

Ruchir Sharma

8 projects • 126 followers

Comments