How to design custom toolholders using a 2D scanner to obtain the pattern. Trace and extrude in CAD and you have a custom part.
Go t the PSU and decided it also needed a DC Inlet for Battery Power
Setting up a new blade for a band saw is sometimes a hard job. But there could be help with Arduino power.
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
skiiiD Editor is IDE for development boards. Now, it supports Arduino Uno and Mega with 70+ modules.
I made a tool to program the Arduino Pro Mini without the need to solder pins to attach the USB bus port.
I was able to modify Adafruit's Freq Show program to enable it to run on the pocket CHIP.
A circuit for writers and bloggers that prints words or sentence on press so you don't have to type keywords in document multiple times.
Sorry - this is not a hardware project, by maybe it helps you as much as it does to me and lets you edit a config. txt file with more fun...
With just a few minutes make a simple oscilloscope good for measuring frequency, testing capacitors and much more.
I have a little paint booth in my shop, so I created a device to shake paint cans for me.
Soldering needs to be done in a well-ventilated environment or a Fume Extractor should be used.
Inductance meter on favorite ATmega328P-PU running 16 MHz.
Here I built a simple digital voltmeter circuit with a PCB using ICL7107.
Create and connect to a Jupyter Notebook server on your Raspberry Pi to control your MATRIX Voice or MATRIX Creator!
Rebuilding the PIC Inductance meter on STM32F030.
WIND is a project accelerator for the Adafruit Feather series microcontrollers. It turns them into easy to mount and wire together projects.
Rebuilding bike pedals often calls for specialty tools that might cost more than new pedals. This is how to make your own.
A device for controlled ejection of fluid by volume (medicine/ chemical / fuel) or drop by drop for different applications.
The best aid for powering your Arduino or Raspberry Pi projects.
Do some soldering? Dislike the fumes burning your eyeballs? Build a quick flexible fume fan to extract those fumes away like a boss.
This tool will be certainly very useful when you need to make precise and stable connections to small points of a printed circuit board.
A real lab power supply costs a lot, so most of as will not buy one just for the pleasure of testing things at home. Here is the solution.
The Particle Web IDE, Particle Dev, and Particle-cli are not the only ways to program Particle devices.