Give a Magnet-Switch a try
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
Minimalist cars race with a strip of smart LEDs and two switches.
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
I've a small and sweet Raspberry Pi Zero. Now I can switch off my Raspberry Pi Zero without a monitor or keyboard or LAN.
Always forgetting the opened toilet lid? Men, let us educate you!
Build a treasure chest or use an existing storage box, attach a push-button quadrature rotary encoder (endless spinning dial) and lets go!
It is a small touch switch board with display. It has also a temperature sensor for live temperature displaying.
A switch that switches itself and reflects the state of devices if switched via other means (a.k.a. smartphones).
This post documents the ubiquitous "6 Pin Push Switch" aka "Mini Self Locking Push Switch" and explains how it works.
Don't deny it, you've always wanted one.
Turn Off the light, and it will turn ON: endless fun!
Switches on a relay when BLE device is in range
Bipolar solid state power relay, capable of commutation without arcing and/or overcurrent events.
Place a card on RFID reader and power the desktop ON/OFF.
Control appliance using a hand gesture without any microcontroller, only bare electronic components.
Quick Project to Interface Push Button with Raspberry Pi
I created a box that lights up green when people are speaking at a acceptable level. It flashes red and plays siren when people yell at it.
Digitizing household mechanical switches with CoolMOS C7. `
This tutorial will show you the easiest and best way to use a pushbutton with your Arduino board!
Use your GSM shield to control the output of Arduino through SMS messages.
This project shows tilt sensors and its functions.
Arduino Nano based relay power switch for Raspberry Pi 3 (Kodi) operated by common TV remote controller.
Switching is a major part of any IoT project and I will explain how I used a water level switch.