Use a Bluetooth module to replace a traditional wired connection for transmitting serial data.
Three ways to use Arduino as a USB to TTL converter. Helpful one!
With the coming .NET Core 3.0, cross-platform serial port is available. Let's have a try on RPi Raspbian.
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
Bring the versatility of the Arduino Uno to the powerful world of IoT with the Onion Omega board. Make any Arduino project IoT compatible.
This project will show you how to use a big sound sensor ( KY-038 ). We'll display the values on the serial monitor.
This is a step-by-step tutorial on how to use the RAK811 LoRA node module and send LoRa packets to a gateway.
Arduino and Python-based project that will help us read the sensor values and plot it on Python.
This project will show you how to use joystick with serial monitor.
This project helps you to send strings from computer to your Arduino via serial port.
I will show you how to use an ultrasonic sensor.
This little project will show you how to use a photoresistor. We'll display the analog value on the serial monitor.
How to create serial port to TCP converter using Arduino code running on ESP32 processor, using Moduino X ESP32 industrial device.
How to connect a serial port Arduino Mega 2560 R3 to an Arduino UNO R3 compatible and to an Arduino Leonardo clone.
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
Serial communication between the Pycom LoPy and the Arduino Uno.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
Using the library SoftSerial and doing the configuration of one 10-bit ADC pin.
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
Read and write to multiple Modbus RTU slaves from the cloud through serial communication using WolkAbout IoT Platform.
STM32 UART communication - Introduction with STMCUBEMX and Atollic TrueSTUDIO.
In this tutorial, learn how to send data to TCP server using a SIM900 module.
This project shows how to use the Simulink Support Package for Arduino Hardware to run a Simulink model on an Arduino Mega 2560 board.
Configuring Node-RED for usage with and our RS485 HAT on a Raspberry Pi.