In this little project, I'll show how to use a rotary encoder.
Helps parents know the whereabouts of their children's vehicle and admin of travel agencies know the location of their cabs.
UART communication is still one of the most used interface in the embedded world. SNIFFly helps to log up to 4 UART channels.
Write and read data like text and images, which cannot be stored on Arduino due to its large size.
AT Workshop - Walk through communicating with cellular modems through UART with CircuitPython.
We design a flexible, remote-controlled test system for polar codes in FPGA.
How do you get a notification when your home has lost power, or lost its internet connection? Enter Particle Electron!
We wanted to increase the communication range of the Tactigon Skin so we could use it over longer distances than BLE can offer.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
In this post, I have used a LDR to sense the black obstacles (cactus )in this game and make the dino jump using a system of Arduino and pyt
One of the many ways to tinker with your board!
This project uses a serial 40x4 LCD display with a Teensy board to help a compact serial terminal receiver to be connected to many systems.
We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT
We implement RS-485 protocol in communication between two Arduinos using MAX485 module.
Ever got stuck on that super difficult hidden maze puzzle? Fear no more and build yourself an automatic mapping device!
M5Stack and Micro:bit can control each other, thanks to the M5:Bit
The project shows how to design using the same USB to enumerate as two COM PORT Terminal.
This project shows you how to tune the parameters and monitor the signals of an algorithm running on LEGO MINDSTORMS using Simulink.
Attractive GUI designs seem quite possible with Raspberry Pi for automation side.
Datalogger is simple to use but with great performance. The base, concise and intuitive.
A lab to start using serial ports on STM32F4 from Microframework.
Wireless communication in between two FPGAs. Compressed image will be sent to another FPGA board. So you can send your images very quickly.
If you've wanted to measure the air quality at your workplace, look no further.
I will further extended my last project on serial communication by writing a program that controls the built-in LED on the Arduino Uno.