PC application for control Arduino 10 switch via Bluetooth or serial port.
Extend yourself into the virtual realm by converting natural hand movements (such as twisting and rotating) into your favorite apps.
"FTP Data Logger" with PHPoC which transmit the serial data from the console to remote FTP server to monitor your device's console easily.
I will show you how to use an ultrasonic sensor.
This little project will show you how to use a photoresistor. We'll display the analog value on the serial monitor.
How to create serial port to TCP converter using Arduino code running on ESP32 processor, using Moduino X ESP32 industrial device.
How to connect a serial port Arduino Mega 2560 R3 to an Arduino UNO R3 compatible and to an Arduino Leonardo clone.
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
Serial communication between the Pycom LoPy and the Arduino Uno.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
Using the library SoftSerial and doing the configuration of one 10-bit ADC pin.
Read and write to multiple Modbus RTU slaves from the cloud through serial communication using WolkAbout IoT Platform.
It is controlled by an Arduino Mega 2560 and connected to Raspberry PI via WiFi using ESP8266. It is also able to run independently.
In this project I will give you an introduction to UART.
Learn about the communication methods between two or more Arduinos using UART or I2C.
This article described a recent Python library that I wrote which can send/receive texts and control phone calls.
STM32 UART communication - Introduction with STMCUBEMX and Atollic TrueSTUDIO.
In this tutorial, learn how to send data to TCP server using a SIM900 module.
This project shows how to use the Simulink Support Package for Arduino Hardware to run a Simulink model on an Arduino Mega 2560 board.
Configuring Node-RED for usage with and our RS485 HAT on a Raspberry Pi.
This project will show you how to use RFID with serial monitor.
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
In modern world, it's very difficult to keep check on patients' health. With my project, you just need to ask Alexa for their pulse rate.