Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Smart home system using MediaTek Linkit, Xbee, Arduino, Orange PI and Azure
An innovative wearable technology for visually impaired peoples.
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Quickstart guide to start with #NodeMCU on the #ESP8266 Thing, hacking to become a ultra-low power, solar power only driven #SENSableTHING
Arduino Project: How to make a Fidget Spinner RPM counter with Hall-effect sensor.
This is the first generation of my Arduino based mini-weather station with Wi-Fi connection, which is able to post data publicly online.
Smart Garden is a plant environmental monitoring system.
Use an infrared sensor to sense eye movements and control an LED.
Small, cheap, low-powered sensors are still a challenge to make. LoRa-Tooth uses $6 BLE modules to make untethered sensors with long range.
Sunglasses that serve an even more useful purpose than protecting the eyes of the blind. They can help them detect objects in front of them.
Use a USB air-quality sensor dongle to quickly mount an indoor air monitoring system and prevent headaches and further impact on health.
Build a people counter using a simple PIR sensor, a Raspberry Pi and Ubidots
Record and play back a few seconds of input stored in EEPROM.
A fully autonomous fixed-wing glider designed to safely return a payload after being deployed on near-space missions.
Weather station displaying indoor temp/hum, as well as climate conditions and present day/3-day forecast.
Our project will capture local data, send them to the cloud, where everyone can see them through the internet, acting remotely from there.
Instead of using single camera and complicated image recognition algorithms we can take advantage of Kinect libraries.
I want to show you how to make an application and connect it with the Arduino 101 platform for Internet of Things applications.
A powerful Maritime Instrument & Display Controller, based on UDOO Neo, acting as a navigator, chart plotter, wireless NMEA multiplexer & ?
Tracks compass heading, altitude, temperature, pressure, humidity, time, travel distance and GPS location during a hike.
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
How to measuring the air quality of the Open Data Institute using an Arduino and a Shinyei PPD-42.