Build a battlebot from cardboard using Arduino.
I built a cornhole board that tracks a thrown bag with computer vision and adjust the board to make it land in the hole.
An ROS-enabled quadruped robot built with low-cost 9G servo motors.
SimAr stands for Semi-Intelligent Multifunctional Robot SimAr is a humanoid robot which is designed to unleash the secrets Of the robotic.
The cake is a lie.
SAINT stands for Scalable Autonomous Intelligent Navigation Transport. This is the concept to build fully customizable open platform Robots
Make a simple and programmable servo arm out of readily available materials!
A laser-cut robot kitten that runs and learns from you.
MeArm mounted on smart robot car controlled by 2 Arduino UNOs
A robo which follows an object of uniform color using Computer Vision.
Thanks to EEG, the Arduino robot car makes left turns. Speedier or slower according to the level of attention meassured
Use a PID Controller to monitor a wheel's speed and consistently reach the desired RPM.
Barbot is an open source Arduino cocktail mixing robot controlled with the hybrid mobile app via Bluetooth.
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
The Critter is a simple Arduino walking robot that is fully 3D printed.
This project consists of a small robot controlled via WiFi using an Arduino MKR1000, MKR2UNO Shield Adapter and Arduino Motor Shield!
A 3D Gesture controlled Wireless Robot with live video streaming based off Raspberry Pi. (Made exclusively for LeapMotion #3DJam).
We present you the radar we created in the MicroLab lab. This radar uses 2 ultrasonic sensors and 1 motor moving continuously 360 degrees.
Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).
A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.
I made a servo motor with a 3D printer and a 4-legged spider robot.