Host a Telegram Bot on your Arduino and chat with your brand new IoT device!
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
This project shows how to control a 6DOF robot arm via web.
The making of a large 3D printer (400x400x400 mm) for a college project.
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Nox is a nice (and time-consuming) robot which uses SLAM (ROS) with a Kinect to navigate in its environment.
Non-wearable and Zero-learning solution to perform auto SOS call when an elderly falls down
Fun and easy green robot! Build a sun tracking solar array in under an hour. Bonus: charge your phone with free clean energy!
There is a new puppy in the family! PocketPilot is a smaller version of the BBBmini Flight Controller.
Based on Blockly and BlocklyDuino, here's a multilingual enhanced version with supervision, upload, multi-level blocks, etc.
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
Version 2 of my lane detection system!
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
A very good wireless local area (and personal) network is undoubtedly the Bluetooth (BT). Let's play with it!
A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.
The image extraction is based on a novel algorithm which effectively works with the encoding system of the robot movement.
Tito is a Bi-ped, dancing DIY robot, derivative from Zowi and Bob. Basically has been adapted to a standard Arduino UNO board.
An amazing off-road robot with 4-wheel drive.
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
A couple of days ago, I got a gesture recognition sensor. Used it for a couple of days, I am pretty sure that this is a classic work!
This project is a simple embedded software with the push of a button. LED is blinking different with respect to time of press button
Perform limited autonomous navigation and plot a 2D map of the environment.
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.