An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Make a simple and programmable servo arm out of readily available materials!
Line Follower Robot follows a black line.
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Host a Telegram Bot on your Arduino and chat with your brand new IoT device!
Simple to get started yet infinitely expandable.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Based on Blockly and BlocklyDuino, here's a multilingual enhanced version with supervision, upload, multi-level blocks, etc.
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
In this tutorial, you’ll learn how to use SD and micro SD cards with Arduino in a simple project to measure the environment temperature.
Here is a step by step guide to making a "crawler robot."
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Need your project to gauge distance? Here's your module!
How to hack a Wii Nunchuk to make it work with Arduino.
Build a Semi-autonomous, 4WD Raspberry Pi Car with a camera stream!
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Light up an LED!