This project will show you how to make a Bionic Hand Controller.
Robotics, Arduino, EasyDriver, Stepper Motor, Servo Motor, Etc...
A simple way to control a motor with a potentiometer and an Arduino.
Ten LEDs connected to an Arduino Uno and a potentiometer.
This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.
A miniature three degrees of freedom robotic arm that you can even record the movement and loop it!
This project will show you how to use a TFT Screen.
A theremin made out of two ultrasonic sensors.
Control a virtual gauge using a potentiometer, Arduino and BLE Shield.
This project will show you how to make a robotic arm using four servos.
This lesson aims to show how to control an addressable WS2812 LEDs strip in order to obtain various colors using 3 potentiometers.
An interactive kids toy that allows children of young ages to experiment with different switches and buttons - no code needed!
A 555 timer circuit with a 10k potentiometer and 9 LEDs for those times you just want to kick it up a notch.
AKA how to build your own laboratory vortexer without spending a lot of money.
I used a potentiometer to control a game's avatar.
This post describes how two calliope minis can be used to create a wireless messenger using the built-in radio.
Here's a quick Node-Red demo using a potentiometer, MQTT, and MSP432 LaunchPad!
Control the position of the Servo motor with the Arduino and the potentiometer.
This project shows how to light a LED using a potentiometer.
Looking for more productivity, here is how to make a simple pomodoro timer prototype with LEDs and an LCD screen.
This project will show you how to communicate using 433MHz modules.
Let's learn how to control a servo's position just by twisiting a potentiometer!
A 3D-printed, ATmega2560 (Arduino Mega)-based DJ MIDI controller .
This circuit allows for one thermistor input and will output up to four similar values using digital pots.