The servo motor will spin 90 degrees.
Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.
I built a cornhole board that tracks a thrown bag with computer vision and adjust the board to make it land in the hole.
A 4-wheeled rover to transport emergency supplies to infected people without any risk, thanks to an over-4G Flask joypad control and camera.
A NEMA 17 stepper motor based Rotating Platform for capturing fancy rotating videos.
learn how to program Attiny84 with this custom Breakout board with ams1117 for basic level projects like blinking LED and stuff.
The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
I will be presenting you the otto robot project using cardboard and arduino, that is best out of waste
Small POC. Upgrade to an old toy (Lego DDK R2D2 ). Now is WIFI controled and can do over the air software update.
Problem: You want to attach your Raspberry Pi to a robot and So you have to need Powering a Raspberry Pi with Batteries
It's not Wall-e, But it looks like Wall-e a bit.
The temperature will be monitored with an LED, and the regulation will be done with a fan which will be turned on at a certain temperature.
Arduino Workshop-Simple Motor Control This tutorial we are going to Arduino Simple Motor Control, in one
Use a TV remote control to the micro:bit to turn on and off the DC Motor of Snap Circuits.
Ultimate getting started guide to easily understand how stepper motor work and how to properly control using an Arduino board
How to interface servo motor with Raspberry pi
Closed loop universal motor control system using PID algorithm.
This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
n this tutorial, let's explore what is a servo
The making of a large 3D printer (400x400x400 mm) for a college project.
Use a PID Controller to monitor a wheel's speed and consistently reach the desired RPM.
Make a program for the Arduino Pro Mini in Visual Studio to control motor speed with PID which can archive it exactly.
Nox is a nice (and time-consuming) robot which uses SLAM (ROS) with a Kinect to navigate in its environment.
A simple way to control a motor with a potentiometer and an Arduino.