Build a battery-powered Plant Guard that reminds you to water your plants.
The soil moisture sensor that gives you percentage of moisture in soil!!!!!
In this project I use a our device to create a simple irrigations system This system watering your plants, you can be defined all thresholds
Check your plants soil moisture with this simple tester. You will know if you need to water your plants.
Use this project for simple moisture monitoring of your garden or upgrade it and connect the data to some smart irrigation system.
Soil Moisture Sensor is a modern, completely sealed capacitive 1-Wire moisture sensor with temperature sensor. How to use it with Arduino?
The moisture content of land is measured and it delivers to owner. Based on the message he can irrigate the land
The moisture sensor monitors the moisture of the soil, and sends a SMS to the user when the system breaks the threshold moisture.
Controlling and monitoring the pump which is used to irrigate the agricultural land.
You will learn how to use the moisture sensor for IoT to monitor soil moisture and send a low humidity alert to your telegram.
A friendly alpaca soap dispenser that helps you wash your hands using TinyCircuits small Wirelings sensors
Monitor the water content of the plants and giving water to the plants by setting a threshold value using soil moisture sensor and alerts.
Using soil moisture sensor we need to detect the amount of moisture present in it. Led indicates the presence or absence of the level.
Use Meadow. Foundation to quickly and easily wire up a Capacitive soil moisture sensor, and graph it using an LED bar graph.
If you have owned/ own plants, you know its hard to keep them alive. The plant moisture sensor is here to help.
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Build a small wifi enabled soil moisture sensor and monitor your plants from everywhere with the Sensate Sense App (for Android and iOS).
Campable helps you find the perfect spot to pitch your tent while protecting you from increasingly erratic weather!
The project utalises RF MCUs to communicate sensor data to cloud gateway. The sensor data collected is then visualized on an IoT dashboard.
Using YL-69/HL-69 sensor with the Bolt Wi-Fi Module to read the moisture of soil and send an SMS alert crossing threshold value.
Level Indicator for watering system with 5 steps (0%, 25%, 50%, 75%, 100%) for water and moisture levels, in a 3D-printed housing.
An inexpensive flood detection system for developing countries.
The IAMSEC housesitter gives homeowners peace of mind that their property is being monitored by a robust IoT device, free of intrusive data.
How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.