Want to add your board to Microsoft's Fantastic Education Platform MakeCode and need a hand doing it? Check this out.
A simple and zero cost way to add JTAG, I2C expansion, and UART to your hardware.
Create your own giant RC servo using this UMC! add a potentiometer to a motor, plug it in and you're as good as done ;-)
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
An innovative implementation of a logic signal acquisition and analyzer unit based on the FlexIO peripheral of new Crossover MCU.
Hello everyone! In this article I’m building a bluetooth controlled robot with Arduino. It can be controlled with an Android phone.
Be reminded to get up by using loud sounds from your Stand-Up Alarm Chair. Stand up to sitting down and improve your health!
AVR-HV2 is an Arduino-based high voltage parallel programmer for AVR microcontrollers.
Learn how to program the Color Organ of Snap Circuits to slowly switch through the colors of the rainbow.
Demonstrating a bug-free Soft Finite State Machine by using STM32 Nucleo144 Dev. Board and Adacore through GNAT
In this project we are going to make Atmega16 based traffic light project. Here we have taken one 7 segment and 3 LEDs to denote the signals
How to convert from analog to digital signals and vice versa using simple Python on microcontrollers.
Print this device to evaluate a 3D Hall effect sensor in an angle + depth setup.
Earthquake sensor using the Sigfox network.
Children project: LED illuminated plastic ball e.g. Christmas bauble, room decoration. Up to 8 channels are driven by PSoC4BLE.
E32 LoRa (long range) device very cheap and very long range (from 3Km to 8Km), here an Arduino shield for my library.
You'll learn how to construct a Mini USB Arduino.
Detect rain using together Digi Xbee3 and rain drop sensor.
The presented robot captures line position with IR Sensors. If the robot get off the line it will U turn and back to the line again.
Handheld portable device design for routine check (ex, Watchman's clock).
Drive a 32x32 RGB LED matrix with the NXP i. MX RT1010 EVK.
Looking at the different micros from STM and comparing them to each other along with an Arduino UNO, converting an STM32 board to an Arduino
If you want to celecbrate the Christmas this year by a special way then this will be your best guide to make an amazing Christmas tree.
Balancing two-wheel robot with an onboard camera. When different colors are seen, the robot executes different trajectories.