Here in this tutorial we're going to tell you about how you can interface atmega16 microcontroller with 16*2 LCD in 4 bit mode.
Usage of inductive sensing (MagSense) by Cypress' PSoC4700S to measure contactless the speed of my Gyro Twister (Powerball).
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Start exploring your new development board in less than 30 seconds!
Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
This time we're gonna show you, how to begin with the MagSpoof V3, a tool to do security tests on payment methods.
A short guide written back when I was studying C for how to diagnose and fix Memory Leaks and Errors with Examples.
Run Golang on this old but still popular 8-bit AVR microcontroller.
Here in this tutorial we have transmitted data from microcontroller to PC using one of the UART of STM32l100 mcu.
In this article we shall see what a robot controller is, what is it used for and how to get started with the Nano Robot controller.
How to convert from analog to digital signals and vice versa using simple Python on microcontrollers.
This is a vintage VFD tube clock that uses Ethernet for both power and data.
Print this device to evaluate a 3D Hall effect sensor in an angle + depth setup.
This is a little demo with Seeeduino XIAO - Arduino microcontroller. The demo uses 4 modules. 2 sensors, 1 switch, and 1 OLED display.
Earthquake sensor using the Sigfox network.
Children project: LED illuminated plastic ball e.g. Christmas bauble, room decoration. Up to 8 channels are driven by PSoC4BLE.
Anitrack is an autonomous system that can track an animal's position, measure its temperature, its heart rate and its movements.
An escape room model based on the booby trapped lab of a mad scientist. Includes various IoT components running on an Uno and Artemis.
E32 LoRa (long range) device very cheap and very long range (from 3Km to 8Km), here an Arduino shield for my library.
You'll learn how to construct a Mini USB Arduino.
Detect rain using together Digi Xbee3 and rain drop sensor.
The presented robot captures line position with IR Sensors. If the robot get off the line it will U turn and back to the line again.
Handheld portable device design for routine check (ex, Watchman's clock).
Drive a 32x32 RGB LED matrix with the NXP i. MX RT1010 EVK.