Literally the smallest Arduino. Check out this post to learn how to set it up!
A review of the Seeeduino v4.2 from Seeed Studio.
This blog post will explain how to setup and run a Hello-World program in Microsoft Azure Sphere MT620 for first time
A simple and zero cost way to add JTAG, I2C expansion, and UART to your hardware.
Bringing i. MX RT1010 EVK (MIMXRT1010-EVK) and the MCUXpresso SDK to STEAM (Age 6-16) Education: Scratch/Blockly
In this project we are measuring the temperature of the environment using temperature Sensor (LM375).
Your mood = Ambiance of the room.
In this project we are going to make Atmega16 based traffic light project. Here we have taken one 7 segment and 3 LEDs to denote the signals
Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.
Hello everyone! In this article I’m building a bluetooth controlled robot with Arduino. It can be controlled with an Android phone.
Learn how to use an Arduino (uno) microcontroller to gather and analyze data for all your curious questions!
Balancing two-wheel robot with an onboard camera. When different colors are seen, the robot executes different trajectories.
A simple blink code for 89C51 microcontroller.
Learn how to control the state of the LED with the press switch.
I have never been a supporter of drag and drop but MakeCode may have just converted me.
Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
Detect rain using together Digi Xbee3 and rain drop sensor.
Here in this tutorial we're going to tell you about how you can interface atmega16 microcontroller with 16*2 LCD in 4 bit mode.
Be reminded to get up by using loud sounds from your Stand-Up Alarm Chair. Stand up to sitting down and improve your health!
Learn how to use your micro:bit for programming the RGB LED integrated into the Color Organ of Snap CIrcuits.
In this project we are going to interface one dot matrix LED display with AVR(Atmega16) microcontroller.
A short guide written back when I was studying C for how to diagnose and fix Memory Leaks and Errors with Examples.
We developed a glove with an inertial measurement unit (IMU) sensor attached to control a wheeled robot using MSP 430 and myRIO board.
Here in this tutorial we have transmitted data from microcontroller to PC using one of the UART of STM32l100 mcu.