Start exploring your new development board in less than 30 seconds!
This blog post will explain how to setup and run a Hello-World program in Microsoft Azure Sphere MT620 for first time
Usage of inductive sensing (MagSense) by Cypress' PSoC4700S to measure contactless the speed of my Gyro Twister (Powerball).
In this project we are going to make Atmega16 based traffic light project. Here we have taken one 7 segment and 3 LEDs to denote the signals
Run Golang on this old but still popular 8-bit AVR microcontroller.
Here in this tutorial we're going to tell you about how you can interface atmega16 microcontroller with 16*2 LCD in 4 bit mode.
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
Here in this tutorial we have transmitted data from microcontroller to PC using one of the UART of STM32l100 mcu.
How to convert from analog to digital signals and vice versa using simple Python on microcontrollers.
Print this device to evaluate a 3D Hall effect sensor in an angle + depth setup.
Connect your microcontroller to the internet by adding ESP8266 WiFi module!
UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!
Have you imagined your project to last on regular AA batteries for almost 5 years? This is possible with the ESP32 chip.
Hugo just turned one, and to celebrate we bought him a Duktig kitchen from IKEA. I added a working microwave.
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Getting started, Arduino style, with ESP32 and an integrated OLED (WEMOS/Lolin).
Learn how to create a circuit to increase the electrical current of the Arduino pins to activate loads that need more electrical current.
This is a little demo with Seeeduino XIAO - Arduino microcontroller. The demo uses 4 modules. 2 sensors, 1 switch, and 1 OLED display.
This project is based on Anthony Russell's (a.k.a. BADFEED) Tiny Tetris; I just changed its OLED 12C configuration and added a joystick.
This is very compact size LED scrolling display board. It feature Bluetooth and ATmega328 chip so we can exchange data using Android.
This is an utterly useless project since this magical object is quite useless. Everybody forgets stuff, naturally.
A fun, colourful RGB LED matrix with a twist!
Program the ESP32 on your MATRIX Voice over WiFi using the Arduino IDE, and utilize it as a standalone satellite device.