An attendance system based on Arduino and RFID reader which will save attendance data in real-time to Google spreadsheet.
A low-cost stick designed for blind people that enables them to walk without any assistance.
Using TFT LCD Display 2.8" with STM32 through SPI communication.
See how an Arduino can be transmit music over AM with only a few lines of code.
This project is made using TI-RISK. This robot is controlled through the HTTP web server.
Learn how to create a circuit to increase the electrical current of the Arduino pins to activate loads that need more electrical current.
In this article, you will learn how to use the world's smallest Arduino to communicate with the Nokia 5110 LCD.
A simple tutorial on programming ATtiny microcontrollers with an Arduino Uno.
Run Golang on this old but still popular 8-bit AVR microcontroller.
Want to remove the hassle of using command-line every time you need to upload a new firmware? Now you can!
Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!
A short tutorial to start programming Arduino Uno without using the Arduino IDE.
This is a vintage VFD tube clock that uses Ethernet for both power and data.
Tutorial on object detection with Kendryte K210 and raccoons!
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
A robot that learns to move towards the nearest obstacle and maintain a minimum distance using deep reinforcement learning on an ESP32.
Would you like to add finger print to your project? Here is a simple tutorial to help you achieve that!
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Here a tutorial on E32 LoRa (Long Range) device very cheap and very long range (from 3Km to 8Km). Start with specs and basic usage.
Go beyond the Arduino with this customizable Uno template. Take your prototypes to the next level!
In this article, you will learn how to implement a feature to monitor the real-time clock battery and prevent problems in the circuit.
Create a complete cloud-based weather sensor with humidity, pressure, temperature and light sensing.
Looking at the different micros from STM and comparing them to each other along with an Arduino UNO, converting an STM32 board to an Arduino
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.