Looking at the different micros from STM and comparing them to each other along with an Arduino UNO, converting an STM32 board to an Arduino
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
Would you like to add finger print to your project? Here is a simple tutorial to help you achieve that!
Run Golang on this old but still popular 8-bit AVR microcontroller.
Learn how to create a circuit to increase the electrical current of the Arduino pins to activate loads that need more electrical current.
In this article, you will learn how to use the world's smallest Arduino to communicate with the Nokia 5110 LCD.
Here a tutorial on E32 LoRa (Long Range) device very cheap and very long range (from 3Km to 8Km). Start with specs and basic usage.
Go beyond the Arduino with this customizable Uno template. Take your prototypes to the next level!
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
In this article, you will learn how to implement a feature to monitor the real-time clock battery and prevent problems in the circuit.
"Magic wand" gesture recognition by running CNN on Arduino.
Program the ESP32 on your MATRIX Voice over WiFi using the Arduino IDE, and utilize it as a standalone satellite device.
Use an ISP programmer and Atmel Studio to flash a blink program to an ATtiny13A, which has just 64 bytes of memory!
Track your position and view your full route on a map!
A simple tutorial on connecting the low-cost ATtiny85 with a Bluetooth module to toggle load.
If you want to upload hex file or if you want to set your fuse in AVR then you no need to buy a programmer, you can do it with arduino.
You'll learn how to create a system to monitoring the soil moisture level of the plant and inform at the users to irrigate the plant.
WIND is a project accelerator for the Adafruit Feather series microcontrollers. It turns them into easy to mount and wire together projects.
When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.
1. Toolchain Setup for STM32CubeIDE 2. Hello World Project with STM32F746G Discovery 3. Run and Debug the Code
This project builds upon the previous digital image camera project and we build a time-lapse camera using the ESP32-CAM board.
Start exploring your new development board in less than 30 seconds!
Give your tree some geek cred and build your PCB skills with this Shimmering Snowflake PCB Ornament.
A series on the 8051 microcontroller that can be used in Teachings. Pedagogy resources that could be used for teaching 6-16 year old kids.