The Floodlight Security System uses the Particle Photon platform to turn on a lamp when motion is detected.
System of early detection of gases in homes, with activation of extractors through MQTT, based on NXP's Rapid IoT Prototyping Kit.
The cheapest DIY version of a WiFi node.
A fun and easy DIY Tazer project you can make at home!
A voice controlled security device that notifies you by sending messages on your phone and alert your neighbour with a sharp tone of buzzer.
Hide a microphone in plain sight using an old Android device. Stream the audio to a Raspberry Pi and visualize it in an IoT Dashboard!
This project will show you how to make your own password-based door lock.
In this project, we will see using Tilt Sensor and limit switch to activate Hexabitz Modules. When door moves, the Modules will give alarm.
Using OnSiteMonitor S/W, you can be monitoring the status and issuing controls to turn your device on/off in just a few minutes.
Smart Energy meter which also provides solution to the last mile delivery problems.
Consists of an alarm that warns when the presence of a person is detected on a house entrance or room. It is based on Arduino modules.
Personal Area Counter Surveillance... at scale.
ESP32 Feather, Display, Adalogger - RTC + SD, Humidity & Temperature Sensor, GPS, PIR, LiPo, Etc...
The mercury switch provides a digital signal upon changing its position, which can be used for security purposes in doors, etc.
This is the continuation of my other proyect 1.0 but with an HM-10 module. It can be used as an intruder detector. It has a downloadable apk
A device that senses temperature in the area and tells the user if anyone enters the room and their distance from an object.
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Ever wondered on how to build a system to alert you of visitors, intruders or when an object is moved.
Make LM358 based IR Proximity Sensor at home. This sensor can work as a Touchless Warning Bell.
DIY system to detect the presence of any object in a restricted area
Ever wondered on how security switches to detect doors and windows opening or closing work? Here is a simulation.
Build anything with HOOSHPAD.