Roomberry is a surveillance robot based on Roomba using a Raspberry Pi Zero W and a camera module.
The project focuses on a real-time robust human detection and tracking system for video surveillance that can be used in varying situations.
After you read this post, your projects will never run out of power after a power outage.
This project can perform a number of tasks simultaneously while being monitored through serial port on your computer or on your mobile.
This project lights a set of LED's depending upon the distance of the obstacle with respect to the ultrasonic sensor.
Gives you time to react to power or pump failures before it is too late.
Extending motionEyeOS on a Pi Zero to support pan/tilt servos, battery backup and an on-screen status display.
User will first scan the right tag and then enter the password for that tag to open the door lock. Master tag will add/rem other tags.
In this project, we will be using the power of RFID to tap into your garage door opening system.
An alarm control panel made with an Arduino MEGA and a 3.2" Touch Screen.
We will obtain and display the video feeds from two network cameras we built previously.
The vibration sensor is a low-cost solution for simple applications where impact (e.g. patting a toy) translates to a switch event.
You may have seen lots of face securities in mobiles but this one is Heuristic-eye with face recognition on IP webcam for home security.
Use a SparkFun ESP8266 Thing Dev and HC-SR04 to create a monitoring device that can make sure your door stays closed while you're away.
Monitor your home or any other asset remotely using only the Pi 3 and camera (supports motion detection).
Yet another DIY home security project with Raspberry Pi and the Perl programming language. Sensors report status to server via UDP messages.
Turn your Raspberry Pi and old Android phones into a security camera and monitor it from an IoT platform!
Alexa can secure and control your home using Z-Wave devices and Raspberry Pi.
A wireless doorbell that when pressed, alerts the user and takes a picture of who pressed it.
Smart home surveillance camera with face recognition and voice chat capability using Raspberry Pi, OpenCV and Amazon Cloud services.
The system will give access on scanning the right tag and will sent us confirmation message otherwise it will send alert message.
Wi-Fi connected desk clock with RGB panel, controls IR and Wi-Fi based switches to control AC appliance via IR or Internet to save power.
How to make a functional application with Blynk and the Linkit Smart 7688 Duo board, with utility for home automation.
System will send messages when the RIFD and password will be entered. We will also be able to open using Message from mobile.