This project does two functions one it's a live updator and trigger the buzzer if the no of cases increases 500 people for like 10min.
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
You do not have to touch the surface of the faucet after you wash your hands. Wash hands safely and prevent coronavirus disease.
Solar-powered, self-sustaining, touch-less soap and water dispenser to help wash hands in this era of COVID-19.
How to monitor temperature on the Raspberry Pi and visualize the results on a remote TCP-IP display and OKdo Cloud.
A door, just smarter. Retrofit "smarts" into the traditional entrance and never leave your door unlocked again!
This project helps you kill viruses by making sure you really wash your hands for 20 seconds - and keep up the habit.
Motion & Human Presence Sensing with Ultra Low Power Consumption and Bluetooth Low Energy Connectivity
Home automation using google firebase and a NodeMCU which can control the lights, fans and many more.
MQTT-driven IP-relay module, on which the variable part of the MQTT broker’s IP address is set by mechanical switches.
A fully IoT-based system that will notify via message in case you have an intruder in your home.
Save water, save energy and monitor water consumption with a smart faucet.
Alerting the gardener by playing the buzzer when the light intensity on the plants change suddenly.
Get your boards fabricated using NEXTPCB assembly service.
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
Turn your wall switch into a smart switch using this faceplate. Lights can be controlled via Home assistant. Two servos and a ESP32CAM board.
COVID-19 will spread by the direct contact with the switches. Since, auto light is used to avoid making physical contact with the switches.
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
Voice controlled faucet that responds on the edge or by bluetooth.
Till now you have seen many different kind of Home automation using Smart phone, Google Assistant. But what if you have to do it w/o router?
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
ORB1T V19.0 ALPHA is designed for those who develop IoT projects. All the sensors and basic parts, no soldering needed.
Play your favorite tune for 20 seconds while you wash your hands.