Set up your MATRIX device to enable hands-free control of your room or office lights with the private, open-source voice assistant, Rhasspy.
A modular WiFi smart thermostat that doesn't need you to maintain any infrastructure: deploy it everywhere, integrate with everything.
Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
Develop a GUI to display current air quality values as per the MQ-135 position precisely and control a mini pan-tilt kit (and RGB lighting).
An easy way to make a hand-washing timer, using Arduino.
For those of use fortunate enough to be able to work from home, this device will hopefully help!
Smart adaptor for existing switch which gets triggered based on human presence.
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
WFH? You need a light connected to your calendar to tell your family that you can't be disturbed right now.
Play your favorite tune for 20 seconds while you wash your hands.
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
A simple low cost tool to get analog/digital value of your Grove sensor in seconds, no PC and coding required, quick and straight.
Use some LED panels and strips along with an ESP32 and local webserver to control the lighting of a room from anywhere in the house.
Lucky Money Counting Box with traditional Chinese spring festival decoration, especially for you to count new year Hongbao easily!
E32 LoRa (long range) device very cheap and very long range (from 3Km to 8Km), here an Arduino shield for my library.
Stick with your New Year's resolution this time by setting goals and getting a reward upon completing them.
Learn how to control your MKR RGB Shield using Arduino IoT Cloud and Amazon Alexa.
Build an awesome Christmas light show with the timing coordinated over the OpenThread mesh network!
Learn how to use Arduino IoT Cloud and Amazon Alexa to switch the channel, adjust the volume and turn on or off any TV.
Home automation is anything that enables you to use your home’s lighting, heating, and appliances more conveniently and efficiently.
Using Python and open source software we publish data from a sensor over MQTT, persist the data and visualise it in real-time.
Learn how to use Arduino IoT Cloud and Amazon Alexa to interact with your sensors.