ShAIdes 2.0 is a much smaller, more practical, redesign of the original. ShAIdes is a transparent UI for the real world.
Just say the needed temperature, control your home with voice or Android! Two units on synched Bluetooth link, RFID functions...
Set up your MATRIX device to enable hands-free control of your room or office lights with the private, open-source voice assistant, Rhasspy.
Learn how to use Edge Impulse's TinyML platform to gather data, train a model, and deploy it to a device of your choice.
A modular WiFi smart thermostat that doesn't need you to maintain any infrastructure: deploy it everywhere, integrate with everything.
Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
Develop a GUI to display current air quality values as per the MQ-135 position precisely and control a mini pan-tilt kit (and RGB lighting).
An easy way to make a hand-washing timer, using Arduino.
For those of use fortunate enough to be able to work from home, this device will hopefully help!
Smart adaptor for existing switch which gets triggered based on human presence.
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
WFH? You need a light connected to your calendar to tell your family that you can't be disturbed right now.
Play your favorite tune for 20 seconds while you wash your hands.
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
A simple low cost tool to get analog/digital value of your Grove sensor in seconds, no PC and coding required, quick and straight.
With the recent loss of the Samsung SmartShield I have created a replacement solution using the Arduino Wireless Shield and an Xbee S2C.
Use some LED panels and strips along with an ESP32 and local webserver to control the lighting of a room from anywhere in the house.
Set up the MATRIX Voice ESP32 to be recognized as a configurable WebThing on the Mozilla IoT Gateway with LED andd GPIO control.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Start exploring your new development board in less than 30 seconds!
Lucky Money Counting Box with traditional Chinese spring festival decoration, especially for you to count new year Hongbao easily!
A continuation of our guide: Rhasspy Voice Assistant on MATRIX Voice and MATRIX Creator. Set MATRIX LEDs with a private voice assistant!