ShAIdes 2.0 is a much smaller, more practical, redesign of the original. ShAIdes is a transparent UI for the real world.
A modular WiFi smart thermostat that doesn't need you to maintain any infrastructure: deploy it everywhere, integrate with everything.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
Smart adaptor for existing switch which gets triggered based on human presence.
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
Play your favorite tune for 20 seconds while you wash your hands.
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
With the recent loss of the Samsung SmartShield I have created a replacement solution using the Arduino Wireless Shield and an Xbee S2C.
Use some LED panels and strips along with an ESP32 and local webserver to control the lighting of a room from anywhere in the house.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
E32 LoRa (long range) device very cheap and very long range (from 3Km to 8Km), here an Arduino shield for my library.
Stick with your New Year's resolution this time by setting goals and getting a reward upon completing them.
Learn how to use Arduino IoT Cloud and Amazon Alexa to interact with your sensors.
AI-based hand gloves, gives you a super power to control any devices with motions.
Get your boards fabricated and components soldered using JLCPCB assembly service.
The first version of an automated greenhouse controlled via a MATRIX Creator.
Turn it on!!!
This device can measure the weight of its users (the cats), check cleaning conditions, save the data online and send reminder and alerts!
Feel Bored while Monitoring water tanks in our Houses to avoid overflow and wastage of water? This Simple project can solve these Problems.
Use an Arduino Nano 33 IoT board along with a suite of sensors to monitor the weather and automatically water your plants!
I started with a PIR sensor triggering storage of images on a microSD then ran out of space, so added Azure Storage and trialled sensors.
Make a professional fingerprint attendance device with Arduino. Your data is saved to cloud so you can access it everywhere.
In this tutorial, we will go over how to use a Wia Dot One with a Ultrasonic Distance Sensor to detect mail and then send a notification.