This project provides full instruction how to build WiFi Smart Motion Sensor with email notification without writing single line of code.
Here I have made 2 wheel obstacle avoiding robotic car
COVID19 is spreading very rapidly but most of the Indian people are unaware of it. So to make them aware and give them the current status
A fully IoT-based system that will notify via message in case you have an intruder in your home.
MQTT-driven IP-relay module, on which the variable part of the MQTT broker’s IP address is set by mechanical switches.
Save water, save energy and monitor water consumption with a smart faucet.
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Is there an instant in which you want time to go backwards? Look closely at the water droplet. Is it dripping down or going up?
Switching Led/Relay - Control Data Sensors - Write/Read Memory EEPROM
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
Get your boards fabricated using NEXTPCB assembly service.
Alerting the gardener by playing the buzzer when the light intensity on the plants change suddenly.
Turn your wall switch into a smart switch using this faceplate. Lights can be controlled via Home assistant. Two servos and a ESP32CAM board.
In order to avoid bacterial and virus transmission when using public dispenser, I made the simplest automatic non-contact switch on Arduino.
COVID-19 will spread by the direct contact with the switches. Since, auto light is used to avoid making physical contact with the switches.
How to control a LED using Arduino Uno.
LED interfacing with arduino uno from A to Z. Multiply basic projects for introducing you on Arduino world with leds
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
Till now you have seen many different kind of Home automation using Smart phone, Google Assistant. But what if you have to do it w/o router?
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
In this short article, we are getting to find out how to form a DC motor speed negative feedback circuit.
Voice controlled faucet that responds on the edge or by bluetooth.
A friendly alpaca soap dispenser that helps you wash your hands using TinyCircuits small Wirelings sensors
"Attiny85 based Music Reactive LED strip setup"