This project does two functions one it's a live updator and trigger the buzzer if the no of cases increases 500 people for like 10min.
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
You do not have to touch the surface of the faucet after you wash your hands. Wash hands safely and prevent coronavirus disease.
This project helps you kill viruses by making sure you really wash your hands for 20 seconds - and keep up the habit.
MQTT-driven IP-relay module, on which the variable part of the MQTT broker’ IP address is set by mechanical switches.
A fully IoT-based system that will notify via message in case you have an intruder in your home.
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
Turn your wall switch into a smart switch using this faceplate. Lights can be controlled via Home assistant. Two servos and a ESP32CAM board.
Save water, save energy and monitor water consumption with a smart faucet.
COVID-19 will spread by the direct contact with the switches. Since, auto light is used to avoid making physical contact with the switches.
Get your boards fabricated using NEXTPCB assembly service.
What if you could do much more than just toggle your lights with this switch? N+1 principle in action!
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Voice controlled faucet that responds on the edge or by bluetooth.
Till now you have seen many different kind of Home automation using Smart phone, Google Assistant. But what if you have to do it w/o router?
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
OBJEX V19.0 is designed for those who develop IoT projects. All the sensors and basic parts, no soldering needed.
Play your favorite tune for 20 seconds while you wash your hands.
Save yourself from fire with home made fire security system using Bolt IoT!!!
Create your own laser tripwire like in spy movies using two ESP32s, Arduino IDE, a laser and a photoresistor!
Using just an ESP32 and a RuuviTag, monitor the temperature, humidity, and other environmental sensors on one single IoT platform!
KEMET PIR Lock
Fun and useful project for enthusiastic makers
To prevent the spread of covid-19, WHO recommends to avoid the contact with surfaces or objects.So, I made my main door open with a cellhone