This project does two functions one it's a live updator and trigger the buzzer if the no of cases increases 500 people for like 10min.
Raspberry Pi-powered hardware that notifies you when guests arrive and lets you talk to them on your phone through internet calls.
This greenhouse only needs quarterly maintenance, water refills, and heat maintenance to grow high-quality plants in the optimal conditions.
You do not have to touch the surface of the faucet after you wash your hands. Wash hands safely and prevent coronavirus disease.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
Solar-powered, self-sustaining, touch-less soap and water dispenser to help wash hands in this era of COVID-19.
Prototype of automatic irrigation system with DHT22 sensor, LCD 16 * 2, Mosfet, Genuine Arduino UNO, Motor.
This project demonstrates how to build an IOT system quickly and easily with Mbed, an Arduino like platform, & EtherCAT shield (EASE).
Let's build an IoT Plant Watering system for your household plant using a low cost Particle Photon and a servo motor
A door, just smarter. Retrofit "smarts" into the traditional entrance and never leave your door unlocked again!
How to monitor temperature on the Raspberry Pi and visualize the results on a remote TCP-IP display and OKdo Cloud.
A Smart Tea Machine Using Bolt IoT with Real-time Payment integration(IOTA).
Control your Philips wiz smart bulbs according to the outside light with a Bolt IoT module and an IFTTT applet.
This project helps you kill viruses by making sure you really wash your hands for 20 seconds - and keep up the habit.
Home automation using google firebase and a NodeMCU which can control the lights, fans and many more.
Motion & Human Presence Sensing with Ultra Low Power Consumption and Bluetooth Low Energy Connectivity
A fully IoT-based system that will notify via message in case you have an intruder in your home.
Save water, save energy and monitor water consumption with a smart faucet.
MQTT-driven IP-relay module, on which the variable part of the MQTT broker’s IP address is set by mechanical switches.
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
Get your boards fabricated using NEXTPCB assembly service.
Turn your wall switch into a smart switch using this faceplate. Lights can be controlled via Home assistant. Two servos and a ESP32CAM board.
Alerting the gardener by playing the buzzer when the light intensity on the plants change suddenly.
COVID-19 will spread by the direct contact with the switches. Since, auto light is used to avoid making physical contact with the switches.