IoT water control for irrigation of truffles. It monitors and controls amount of water in storage tanks on field.
How to Start Motor Bike with Phone Call (GSM based project)
My lightweight Arduino GSM mobile phone.
This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.
Track ME is a "small" GPS, SD Card, and GSM Shield controlled by an Arduino Mega.
Call me and get my location.
GSM Home Alarm using a Ultrasonic sensor to detect movement and inform the User of intrusion.
New to LinkIt ONE? Here's a simple, practical project that will get you off to a running start.
Looking for a 3.3V capable NB-IOT board, I came across the SIM7020E. This is the journey to make it work.
Send and Receive Text Messages (SMS) with GSM SIM900 Shield from Seeed Studio - Quick and Easy!
In this tutorial, you are going to learn how to make a vehicle tracking system using GPS and Arduino.
Poseidon is a cheap wireless water level controller for overhead tanks made using Arduino UNO and HC-12 wireless communication module.
Development platform for PlatformIO - Arduino, OpenCPU, ThreadX
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
In this project, a forest fire detection system is built with the help of Arduino UNO and GSM Shield for SMS alerts.
Demonstration program on how to drive a SIM7020 NB-IoT modem, then set up a dashboard using T-Mobile's network and AllThingsTalk API.
Track your goods anywhere and anytime with a GPS tracker sending location data over mobile network to an awesome cloud.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
When it comes to bicycle safety and theft-prevention, The Wingman has your back.
Directions on how to setup your DIYmall GPRS/GPS SIM5320E 3G Module so that you can issue AT commands from your computer.
Winner of Hardware Weekend Manhattan 2015 SmartThings Sponsor Award
A phone call + motion sensor operated operated remote triggering system
Monitor the world's rivers and lakes through a collaborative cloud allowing you to monitor any body of water with a fleet of devices.
The project Arduino and RFID Based Attendance System With GSM is a simple and is used at any place where attendance is taken for maintainin
Monitor what happening in the baby room when we are not present there and send an SMS to the parent when motion is Detected.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.