Detect and record brownouts even when you're not home!
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
This is a simple and fun project with pocket friendly budget.
Sometime I need to measure the exposure of light but a lux meter costs around $30, I made it with a BH1750 sensor which cost me around $10.
A gesture control vehicle made by Seeedstudio Skeleton Bot - 4WD Hercules Mobile Robotic Platform. Having a lot of fun.
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
It is a device that measures CO2 levels, inside and outside temperatures, and humidity.
Basic IoT - RaspberryPI and HDC2010 I2C breakout by itbrainpower. net - RPI HDC2010 temperature and humidity sensor how to
Use Arduino Uno WiFi to access your home Ecobee thermostat and more, this is a good introduction to see APIs in action using OAuth keys.
It's a little and easy project using the photoresistor and LEDs
Using MQTT protocol with Arduino MKR1010.
A self-calibrating, solar-powered cellular tide level and meteorological station based on the Sentient Things IoT Node.
In this tutorial you will learn how to assemble and use a nuclear radiation detector.
Learn how to measure water quality, record the data online and launch a citizen science project!
In this tutorial you will learn how to use a DIY water probe - great activity for students to learn about water quality and environment!
There are a lot of Arduino-based metal detectors using various technologies. This is one of them that uses direct frequency measurement.
Group all the information collected by a MKR WiFi 1010 + MKR ENV Shield in a single, web-based dashboard.
In this project, bring your hand puppet to life with Hexabitz modules.
Learn about water quality in a fun way! Assemble your own DIY water probe and measure conductivity - the degree of pollution of any liquid.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
In this project, you can view the temperature and humidity in your room wherever you are.