As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
In this tutorial you will learn how to assemble and use a nuclear radiation detector.
Control a HVAC zone by retrofitting a manual duct damper with a damper actuator motor and installing a thermostat to control it.
The system is designed to detect unauthorized entry (face masks), that are essential to protect ourselves and to avoid spreading COVID-19.
Use Arduino Uno WiFi to access your home Ecobee thermostat and more, this is a good introduction to see APIs in action using OAuth keys.
This project will demonstrate the real prototype of smart cities product including sensor data manipulation using Google Data Studio.
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
The device uses cheap, off the shelf components to provide live data on stream and river conditions like stage, temp, and conductivity.
Our project is to design and build a wireless sensor array for a pig farm in Thailand.
Display weather information and activate RGB color patterns via this shield, including built-in BMP280 and photoresistor, designed by me.
Arduino how to - using BMP280 (temp & hum sensor) I2C breakout from itbrainpower. net and Arduino 3.3V or 5V shields.
A compact, feature-rich smart UPS for Raspberry Pi boards.
Ensuring safety against electrical fire or shock during earthquake, flood, gas leakage & fire breakout by disconnecting mains with smart CB.
In This Tutorial i'm going to show you how to setup the serial communication between Arduino and NodeMCU for soil moisture monitoring.
A simple DIY project using HC-SR04 ultrasonic sensor to measure the water level of a water tank.
I was looking for a way to show students how computer vision object classification and detection worked then I reached for another M&M...
This is my try to help, I made it to inspire and to share my idea. It works only to detect the symptoms and not the covid19 itself.
In this project, you can view the temperature and humidity in your room wherever you are.
Using MQTT protocol with Arduino MKR1010.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
Lock and unlock your car with an IR remote and display car lock and unlock on 16x2 LCD. Made this for college project.
A Python script that logs measurements from an Enviro pHAT into a Google Docs sheet.
I designed a PCB that uses a Teensy, an LCD screen, joystick, buttons, battery and speaker to create a GameBoy-like gaming system!
... or in other words: LDR Photoresistor on a breakout board