This project creates a real-power energy monitor using a NodeMCU module with ESP8266-12 and ADS1115.
Log your Energy Meter data using a Raspberry Pi and plot graphs of your energy consumption.
Turn a Raspberry Pi into a home energy monitor with inexpensive components.
The Smart Analyzer is an extended version of Oscillogram for Utility Grid with advanced resources: fft analysis on voltage and current.
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
This is a project for a energy tracker that monitors the whole house. It uses the YHDC SCT-013-000 current sensor.
Use the ATM90E26 highly accurate (utility grade) energy monitor ASIC to measure power usage with safe low voltage inputs.
Make an Electricity Monitor for your home that utilises the cloud of the Arduino Yun, Temboo and Google Drive
This device monitors the total current coming into your home and performs and FFT on it to determine what appliances are running.
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
In this article, I explain how I integrated Dr. Wattson Board with Raspberry Pi and AWS IoT to create an Internet-connected energy monitor.
An IoT platform based on the ATmega328p designed to acquire data using industrial standard 4-20mA sensors and MODBUS protocol.
How to measure the instantaneous power absorbed by the electrical system and send it to a display & sound a buzzer if max power is reached.
Project SEUMS - A smart energy monitoring system that will ease the inspection, monitoring, analysis, and calculation of energy fare.
The oscillogram monitor the utility grid, recording the amplitude and frequency values and record the voltage waveform during a disturbance.
This project is aimed at leveraging use of WIZnet board to connect to industrial meters, appliances, SCADA, and PLCs.