CHILLY is a small device who turns your evaporative Cooler into a smart cooler which can be controlled by your mobile phone!
This project creates a real-power energy monitor using a NodeMCU module with ESP8266-12 and ADS1115.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
The easiest way: install Parallax then upload the Arduino code.
There are many charge controllers available, but ordinary cheap ones are not efficient enough to use with maximum power from solar panels.
An IoT device used to check the humidity levels of your houseplants. Low powered, rechargeable, and powered by Particle's Mesh devices.
Use the ATM90E26 highly accurate (utility grade) energy monitor ASIC to measure power usage with safe low voltage inputs.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Fresh, organic food is important! Grow your own in unused space and take care of it remotely. Plants and smarts are powered by the sun!
A 7.5" e-ink display for displaying useful information such as news, weather, crypto prices, tube status and word of the day.
Learn how to use Relay, Ultrasonic sensor and Arduino in one cool and easy project
An electric furnace-air handler, arduino-based, controller.
Get your essential appliances off the grid with just one solar panel
Accumulation of moisture in a closed up space like a bathroom can lead to the appearance of mould, which can cause health issues.
An outlet that can control your devices that need to be plugged in.
Taking control of your plants growing process
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
On this sample I would like to explain why PID-control should be used for speed controls and how the direction can be inverted.
Electronic greenhouse controlled real-time, because the environmental conditions change continuously, so we need an efficient monitoring.
A tiny weather station with our ESP8266 NodeMCU which will report temperature, humidity and dew point to the global community, wunderground.
All resource are given here free. Its easy to understand.
A low cost, high performance energy meter for my home.
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.