Arduino project to detect lightnings using electromagnetic radiation with frequencies from 7-9kHz.
Using the RCWL-0516 radar sensor to detect motion.
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
Using a ESP8266 to detect when a friend is near.
The post box of the future. Get notified when you receive mail!
This is a simple tutorial to create an EMF detector using an ATtiny85 microcontroller.
This module automatically counts the number of people entering or living in a room, home, etc...
How to build a DIY Wi-Fi gas detector that sends SMS alerts using a Particle Photon, a gas sensor and a buzzer
An extremely straightforward project involving a digital PIR sensor, which can be utilised for many security and home automation uses.
A SmartLiving Experiment for Arduino, to detect when something is moving in a room and warn you visually via an LED and an e-mail.
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
My device is just a prototype to show you how to the monoxide detector.
If motion is detected, this will light one LED, and if not, it will light the other.
If it detects water, the circuit gives an audible alarm.
Very simple air quality meter using the GY-MCU680V1 sensor containing the BME680 chip from Bosch Sensortec.
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Find metals underground along with its location in GPS using your raspberry pi
We're developing a prototype for a cheap and easy-to-use probe with a potential application in detection and monitoring of cancerous tissue.
The aim of this project is to process LiDAR and camera data on Zybo Z7-20 to detect objects with usage of data fusion.
Turn on a closet light when the door is opened with a pressure sensor that can be placed anywhere in the room.
Standing/Seating detection - For easy multiple monitors management when using Stand Desks.
Detect cars and people which is blinding by drivers. You need only putting M5Stack and you aren't doing dedicated construction.