This is my try to help, I made it to inspire and to share my idea. It works only to detect the symptoms and not the covid19 itself.
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
There are many commercial home weather stations but most don't have a data logging ability - this is my first stab at making one.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Beekeeping (or apiculture, from Latin: apis "bee") is the maintenance of honey bee colonies, commonly in hives, by humans.
A battery-powered portable datalogger that can store temperature, humidity and ambient light in a SD card.
Designed for crew rowing, this speedcoach is designed to track split times and total meters traveled.
Linkit one project to get atmospheric data on board a high altitude balloon, including air quality sensors, pressure, temperature, and GPS
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
It can give you a controlling device that can helps you to build an underwater robot communicating via Ethernet cable.
Did something move and when?
Periodically store celsius values of six TMP36 sensors to a csv file on an SD card and show values on LCD.
This project is to catch people in the act of making noise and sending out a signal to control something.
Reads and logs information from a vehicles ECU Raspberry Pi and an ELM 327 USB to OBDII cable.
Posture Pal monitors your posture during computer usage to provide user feedback and analytics, and support mindfulness and physical health.
Programming Adafruit Feather 32u4 to write acceleration and gyroscopic variables onto an SD card.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
This project is a medical instrument developed for early detection of dental decay using the electrical impedance measurement method.
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
Want to optimize your power consumption? This IoT Data Logger is for you!
LattePanda and National Instruments LabView