An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Reads and logs information from a vehicles ECU Raspberry Pi and an ELM 327 USB to OBDII cable.
Beekeeping (or apiculture, from Latin: apis "bee") is the maintenance of honey bee colonies, commonly in hives, by humans.
It can give you a controlling device that can helps you to build an underwater robot communicating via Ethernet cable.
Designed for crew rowing, this speedcoach is designed to track split times and total meters traveled.
Arduino based wireless temperature and humidity sensor, can run for 1 year on single 14505 battery, and data transmission is encrypted.
This project is to get a 3-D image to show the pitch and roll angles of your vehicle while off-roading.
Periodically store celsius values of six TMP36 sensors to a csv file on an SD card and show values on LCD.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Did something move and when?
Posture Pal monitors your posture during computer usage to provide user feedback and analytics, and support mindfulness and physical health.
LattePanda and National Instruments LabView
Want to optimize your power consumption? This IoT Data Logger is for you!
We are developing the remote control and sensing platform to connect scientific laboratory equipment to the cloud.
Device that gives you a flash briefing of the health of your plants
The purpose of this project is to two DS18B20 temperature sensors, with one outside and one inside.
This project is a medical instrument developed for early detection of dental decay using the electrical impedance measurement method.
Linkit one project to get atmospheric data on board a high altitude balloon, including air quality sensors, pressure, temperature, and GPS