Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Beekeeping (or apiculture, from Latin: apis "bee") is the maintenance of honey bee colonies, commonly in hives, by humans.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Reads and logs information from a vehicles ECU Raspberry Pi and an ELM 327 USB to OBDII cable.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Arduino based wireless temperature and humidity sensor, can run for 1 year on single 14505 battery, and data transmission is encrypted.
Did something move and when?
Posture Pal monitors your posture during computer usage to provide user feedback and analytics, and support mindfulness and physical health.
LattePanda and National Instruments LabView
Want to optimize your power consumption? This IoT Data Logger is for you!
Device that gives you a flash briefing of the health of your plants
This project is to get a 3-D image to show the pitch and roll angles of your vehicle while off-roading.
Taking a build from sensor to the web - this project allows you to monitor plant data on the local network!
Let's keep an eye on the people we love by checking their oxygen saturation (spo2) and sending an SMS alert below a critical threshold!
This project is a medical instrument developed for early detection of dental decay using the electrical impedance measurement method.
The purpose of this project is to two DS18B20 temperature sensors, with one outside and one inside.
This is my try to help, I made it to inspire and to share my idea. It works only to detect the symptoms and not the covid19 itself.
Use Amazon Web Services to coordinate control of many (swarms) of $20 radio receivers, creating a giant virtual radio scanner and monitor.
There are many commercial home weather stations but most don't have a data logging ability - this is my first stab at making one.
Programming Adafruit Feather 32u4 to write acceleration and gyroscopic variables onto an SD card.