An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Smart cloud-based vehicle OBD-II diagnostics logging and analysis using Azure IoTHub, Stream Analytics, and Machine Learning.
Radio emissions from sky sources like Sun and Jupiter can be received and converted to digital domain for processing.
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Use NFC stickers to track electronic components with the use of a Particle Photon and a database back-end, along with a webpage interface.
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
There is no doubt that you will love this wall clock.
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
It can give you a controlling device that can helps you to build an underwater robot communicating via Ethernet cable.
There is a need to detect the slightest touch of a propeller to other objects to protect the object and the multi-copter itself.
Inexpensive hack to monitor the temperature, humidity, barometric pressure and other factors using Windows 10 and Azure.
Learn how to create a tide gauge that publishes tidal water levels to ThingSpeak and uses MATLAB for tide prediction, analysis, and alerts.
A demo SCADA control system to operate and monitor a pumping water station.
RFID door lock with ESP32 + Microchip 25AA512 SPI EEPROM + SPI 2.4 TFT + WiFi logging on server.
The purpose of this project is to investigate the general tuning process required to use e85 fuel for extra power.
Sending temperature and humidity from Arduino MKR1000 to Artik Cloud
Environment Pollution Monitoring system using Internet of Things-IoT United International University.
How can scientists model and predict the formation of sink holes using IoT?
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
We use the Intel Edison to record bird vocalizations and pass them to a predictive model to identify four bird species from the recordings.
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
Smart weather prediction device which send data to wunderground and receives the predicted 10 day forecast.