A small device that will help you sorting resistors without wasting time with their color code.
View current weather data by using the OpenWeatherMap API along with the new Raspberry Pi 4.
Arduino calculator using 4*4 calculator.
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Use the Azure Sphere Starter Kit and two click boards to monitor current weather conditions and send the data to the Azure Cloud.
Build an inexpensive network of web-connected temperature sensors using Raspberry Pi Zeros.
Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
You can build two weather dashboards in one! Access the Dark Sky API, display weather on your PyPortal, and send the data to Initial State.
Advanced but yet affordable end-to-end medical remote monitoring solution of patient vitals and influence by the indoor air quality.
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
This will walk through how to monitor temperature with a Raspberry Pi and different temperature sensors you can use.
Make a trick-or-treat tracker with a fake pumpkin and a Raspberry Pi WH that lights up!
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
A simple, low-cost flex and pressure sensor!
Track the water quality of different sources by location via SIM808 to avert the detrimental effects of water pollution on the immune system
Despike/smooth data from a DHT22 with a median filter and display on a 0.96 inch OLED with the date and time from a DS3231 real-time clock!
Send longitude, latitude and speed with a BerryGPS-GSM and Raspberry Pi Zero to an Initial State dashboard.
Super easy project using an arduino uno to detect speed of various moving objects with the help of a pair of IR sensors and get the speed.
This Arduino project displays the approximate frequency of the loudest sound detected by a sound detection module.
Its is radar made by using ultrasonic sensor.
This project project the temperature and the humidity level and turn on the LED Light depending on the temperature.
Via Arduino Nano 33 IoT and a PHP web application, check whether you have a particular book in your library before purchasing by using ISBN.