A small device that will help you sorting resistors without wasting time with their color code.
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
View current weather data by using the OpenWeatherMap API along with the new Raspberry Pi 4.
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Use the Azure Sphere Starter Kit and two click boards to monitor current weather conditions and send the data to the Azure Cloud.
Arduino calculator using 4*4 calculator.
A simple sensor to measure conductivity changes in water and other materials!
Build an inexpensive network of web-connected temperature sensors using Raspberry Pi Zeros.
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.
Use a Nano 33 IoT or a MKR WiFi 1010 to access a TI SensorTag to easily build a powerful BLE data logger.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Expand your board's storage with an I2C-enabled EEPROM chip.
You can build two weather dashboards in one! Access the Dark Sky API, display weather on your PyPortal, and send the data to Initial State.
This project will show you how to use a datalogger and how to registered analog values on a SD card.
Advanced but yet affordable end-to-end medical remote monitoring solution of patient vitals and influence by the indoor air quality.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
This will walk through how to monitor temperature with a Raspberry Pi and different temperature sensors you can use.
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
In this project we have designed RFID Based Attendance System using Arduino UNO and RFID MFRC522 Module.
This is my try to help, I made it to inspire and to share my idea. It works only to detect the symptoms and not the covid19 itself.
Make a trick-or-treat tracker with a fake pumpkin and a Raspberry Pi WH that lights up!