Advanced but yet affordable end-to-end medical remote monitoring solution of Patient Vitals and influence by the Indoor Air Quality
Measure water quality in real time. Deploy sensors over a wide area, collect measurements, chart and analyze it.
Android app to control Arduino inputs outputs via Bluetooth.
Arduino counter of pulses with preset.
I have created the project to capture Humidity and Temperature. OLED screen is compact and very bright.
A small device that will help you sorting resistors without wasting time with their color code.
Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
Simplest IoT temperature and humidity meter allow you to collect temperature, humidity, and heat index. Then send them to Adafruit IO.
A Humidity Recorder made with Arduino, control and display data with Android App, both Android and Arduino project are very stable.
Arduino calculator using 4*4 calculator.
Use the Azure Sphere Starter Kit and two click boards to monitor current weather conditions and send the data to the Azure Cloud.
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
Air quality on the job is overlooked. Respirators are uncomfortable. But do you know what you're breathing in? Learn how to build your own.
Recently I’m getting a lot of queries regarding XBee, In this tutorial, I'm going to show you how to interface XBee with Arduino.
Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.
Its is radar made by using ultrasonic sensor.
In This Tutorial i'm going to show you how to setup the serial communication between Arduino and NodeMCU for soil moisture monitoring.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Build a wearable impact force monitor to help keep your very important brain (and body) safe!
This Arduino project displays the approximate frequency of the loudest sound detected by a sound detection module.
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
A low-power Arduino car counter that works by logging each time a car drives over a rubber tube across the road.
Data logging from two electricity meters (type "eHZ") simultaneously and store data (time and value of reading) to an SD card.