Transmit environmental data from the X-NUCLEO-IKS01A3 expansion shield through the Helium Network and log it in a Google Sheet.
Taking a build from sensor to the web - this project allows you to monitor plant data on the local network!
Let's keep an eye on the people we love by checking their oxygen saturation (spo2) and sending an SMS alert below a critical threshold!
Measure water quality in real time. Deploy sensors over a wide area, collect measurements, chart and analyze it.
Android app to control Arduino inputs outputs via Bluetooth.
Arduino counter of pulses with preset.
How to make a Forehead gun自製額溫槍
I have created the project to capture Humidity and Temperature. OLED screen is compact and very bright.
Simplest IoT temperature and humidity meter allow you to collect temperature, humidity, and heat index. Then send them to Adafruit IO.
A Humidity Recorder made with Arduino, control and display data with Android App, both Android and Arduino project are very stable.
A small device that will help you sorting resistors without wasting time with their color code.
Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Arduino calculator using 4*4 calculator.
Use the Azure Sphere Starter Kit and two click boards to monitor current weather conditions and send the data to the Azure Cloud.
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
PART II - An IoT system based on Amazon Web Service (AWS) that simulates an Environmental Station using RIOT-OS and MQTT-SN
This is my try to help, I made it to inspire and to share my idea. It works only to detect the symptoms and not the covid19 itself.
Air quality on the job is overlooked. Respirators are uncomfortable. But do you know what you're breathing in? Learn how to build your own.
Use a Nano 33 IoT or a MKR WiFi 1010 to access a TI SensorTag to easily build a powerful BLE data logger.
Recently I’m getting a lot of queries regarding XBee, In this tutorial, I'm going to show you how to interface XBee with Arduino.
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.