This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
This post gives a general introduction of how to use deep neural network to build a self driving RC car.
This tutorial will take you through the steps required to get started on the WisCAM Linux Camera module from RAK Wireless.
Add the power of a GPU to your rover.
Get machine learning running on your MaaXBoard using TensorFlow
A candy dispenser using Android Things and TensorFlow Lite.
This ML acceleration tutorial is on how to create a DPU TRD in Xilinx VIVADO design tool and how to configure Petalinux for Desktop-GUI.
This crawler robot has a machine vision. Moreover, this robot can pass various obstacles.
This post gives a brief introduction of how to visualize your self-driving model. it can be very helpful for the model debugging.
Get machine vision running on your MaaXBoard using OpenCV.
An Adafruit Time of Flight LiDAR replica.
This article is aiming to give a brief introduction of applying AI edge computing technology to our autonomous Donkey Car project.
integration of Amazon Echo in intel edison board
This application can help to test self-driving model by using video. The developer also can use this tool to understand how the model works.
First article in series about Line Following and Lane Following with CV
This step by step tutorial is on "how to design the VIVADO system and Petalinux System" for DPU 3.0 TRD for ZCU106 FPGA Boards/
Setup the MaaXBoard over UART so you can access it via SSH. Then setup remote desktop.
Hajimete! Let DL pushing madness begin!
Learn how to upload a file of any type (e.g. png, jpg, pdf or txt) to Wia.
It shows how to send data from a light sensor to Azure storage.
How to train your custom CNN model and run it on the microcontroller. Recognize anything! Well, almost.