Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
Loud speaking with a mask can enhance the spread of Covid-19. Cell phones are the perfect opportunity to help people tone it down.
The device uses cheap, off the shelf components to provide live data on stream and river conditions like stage, temp, and conductivity.
Small devices for finding lost children at large venues (like fairs or stores) using face recognition and cell network connectivity
This completely open-source LTE shield for Arduino uses the latest and greatest CAT-M NB-IoT technology optimized for low-power IoT devices!
Send and receive real SMS text messages with your Arduino! A self-contained texting device with its own SIM card and phone number.
Quickstart guide about how to use a GPS module from SIMCom.
How to compile your SIM7600SA-H application with OpenLinux and update the firmware remotely using the Firmware Over-the-Air feature.
Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.
OpenCM is a micro-manipulation framework based on the UC2 system.
Air quality on the job is overlooked. Respirators are uncomfortable. But do you know what you're breathing in? Learn how to build your own.
The WisLink development board is based on Quectel's next-generation BG96 IoT module.
This project demonstrates how to build an outdoor Wi-Fi hotspot managed by IOTA.
Tutorial and codebase walking through making a cellular backhauled gateway which collects data from WiFi devices.
This shows how to program Particle Electron in Python to develop cellular-connected electronics products in a few clicks.
Arduino and OLED based Cellular Automata aka Game Of Life
Connected Arduino-based sensor uses a cellular model to report data to Ubidots IOT site.
Use an u-blox C027 cellular IoT Starter Kit, to connect to the IBM Internet of Things Foundation and visualize the data in real time.
Send a text with an Arduino to tell your friends that they need to ASSEMBLE!
Visually program IoT apps in the browser using an Arduino connected over cellular!
In this tutorial , we will be using a FiPy to send data and publish an event over NB-IoT to the Wia Platform
Use the MKR NB 1500 and Hologram's cellular network to leverage new 5G bands to build IoT applications using the Chirpers flow designer.
A device similar to a medical alert button that can be use anywhere where cellular service is available.
Send flow rate measurements to the cloud and monitor them in real-time with Soracom Harvest and AWS IoT.