TTP224 module with a RGB LED control example
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
A few cool techniques to help you level up and get the job done.
In this tutorial, you are going to learn about interfacing the button with Arduino using the Arduino digitalRead function.
This project will help you to activate an LED with a push button.
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
A great way to save resources (pins) and make a device with plenty of configurations and information in different screens.
An in-depth exploration of controlling your Arduino with a button!
Learn how to use the Arduino Pull-Up resistors in your projects.
Take readings in real-time through the Arduino IDE's interface.
This combines a two-axis joystick, a three-axis accelerometer, and two buttons into one package.
Connect stepper motor to Arduino, and control it with buttons - Quick and Easy!
Read an I2C temperature and humidity sensor with the MT3620 Grove Shield.
Blink for Vehicles, such as bikes and skates. Easy.
Beginner-Example - I bet Beginners will smile after project - sent me an selfie!
Application notes for Pmod HB5 and Arduino Uno. In this app, pushbuttons will be used to control a motor.
Windows 10 IoT Core UWP app that works great with the Pimoroni Rainbow HAT. Simple entry point to start with GPIO, I2C and PWM in C#.
Learn how to use inverter in Visuino and invert the value of a button with it.
A basic guide on how to properly get the Maker pHAT up and ready on your Raspberry Pi board, covering the several features on this HAT also.
Sample Push Button on Intel Edison in Node.js
In this tutorial you'll hook up a physical push button so that pushing it changes the on or off state within a web application.