It's a BLE-enabled, cloud-connected smartphone app used to control & monitor who/when PIR is armed/disarmed. Uses Slack for notifications.
Having many Raspberry Pis with the same Bluetooth name can create confusion so let's change the Pi default Bluetooth name.
A new application for The Tactigon, this time combined to Raspberry Pi to achieve a futuristic lights control!
BLE connected Thunderboard Sense 2, external located, weather-resistant, 3D-printed housing and ThingSpeak data comparison.
A small battery-less Bluetooth Low Energy LCD display that can be controlled using a smartphone app at any given time.
Groby is an Arduino 101 and Grove-based Personal Information Display that uses BLE to display weather, tweets, and more from your phone!
An introduction to Brainium software and hardware stack.
A completely open-source omni-drectional robot platform that can be laser-cut, 3D-printed, and programmed from the web, Arduino, or NodeJS.
I made a BLE car controlled by motion sensor and wah pedal.
This is a project that will hopefully bring down barriers of cost, labor and time to a new level and make IIOT a reality for all of us.
Connect The Tactigon Arduino board to a GROVE GPS breakout board and send position to an Android device for portable data logging
An intermediate level tutorial on building a Blueapp with the Hexiwear device.
Allow users to build complex logic in a hub/gateway device without doing any programming. Includes support for the NXP IoT multi-sensor.
This starts a series of tutorials aimed at getting mbed running on the itracker board by RAK Wireless
The Pumpkin NotiFire is a delicious but questionable combination of a Glade aerosol air freshener, fire and text messages.
Bluetooth mesh connected and motion detected lighting solution for better mobility and accessibility.
Registers nearby BLE devices on a webpage served by a Tessel
An intelligent drive.
Portable cell connected sensors for light and air transmits GPS location and readings to be stored and clickable maps created.
It's a simple demonstration of AI (motion detection) with Brainium cloud module and Rapid IoT Prototyping Kit.
Make your own Eddystone Beacon using TI CC2640R2F BLE MCU.
Low-cost whole-cell biosensors for environmental and medical surveillance.
Simple app to get you started in building your first BlueApp with basic project setup.
This is my first bot.