A Halloween Pumpkin was equipped with PSoC 4 BLE. Ghosts are detected by PIR & Proximity sensors, forcing light show and sound from SD-card.
Please-open.It gives you an open source solution to build your own access control system.
With a Bluetooth Low Energy Power Bank you can use a Smart Phone App to see how much charge it has and receive notifications if its charge.
A basic inter-communication project to send simple command messages to people in your proximity.
Easily actuate devices based on complex sensor threshold logic and/or remote messaging from an MQTT dashboard, with no programming required.
The BlessTags application + CC2650 SensorTag = Motion security system!
Learn how to program and use Arduino over Bluetooth using BLE.
Control a keyboard, mouse and joystick from your phone.
Gamify saving energy and personalize smart energy and home choices with a small character annotating your energy decisions at home.
Ada controls the SensorTile and supports the BlueMS SoC on the tile to allow sensor data to be sent over BLE connections.
Connect to the Super Ball to view all the data including acceleration, rotation, temperature, audio, through your browser or BlueApp.io.
I used to perform well at many sports: walking, running, riding a bicycle, playing badminton, etc.
Blueapp app interfacing with a BluCurrent device.
I hacked to DPS3005 power supply, by connecting a TI CC2640R2F LaunchPad using UART interface to add Bluetooth connectivity!
In this article we’re going to learn how to connect The Tactigon to a motor control board and communicate with it. Part II - Sketch
When you are biking, it's necessary you stand up for keeping your ass from hurting. It'd be nice if you have a saddle that warns you.
This Command Line Interface application included in the SKD provides a mechanism to demonstrate features on QCA402x development board.
Qualcomm QCA4020 connected and securely with BLE Bulb, Smart Lock and Smoke detector which are controlled by Android application with BLE.
Control Hexabitz modules from a smartphone app using Bluetooth.
Introduction to the AVR Toolchain - part of our effortless design workshop series. Part 2 covers how to add Bluetooth connectivity.
A Bluetooth Low Energy / Web Bluetooth tool to measure the energy needs of your embedded projects!
We have added a BLE functionality. This is the continuation of my other proyect 1.0 but with an HM-10. Can be used as an intruder detector.
Connect to SuperBall to use as QuarterBack Trainer to measure speed, rotation, hangtime, through your browser or remotely using BlueApp.io.
This project shows how to connects your RCQ4 device of RadioControlli srl to your smartphone by communicating with Bluetooth.