Add distance and depth measurements regardless of lighting conditions to Donkey Car!
How to install some Amazon sourced LED lighting on the windshield and the bumper of an '03 Jeep Wrangler (TJ) from beginning to end.
A model road with lights that only work when there is a car on the road. It also sounds an alarm when the car drifts out of the lane.
With this simulator, you can develop an OBD2 device and related service on your desk without going to the garage.
Driver library makes Hercules LaunchPads and Hercules micro controllers work with Hitachi type LCD.
Using a particle, we connected it to an Air Ride suspension in a VW Rabbit and are able to control it through the phone.
Step by step tutorial for a freeRTOS project on the Hercules TMS570LC43x and RM57Lx LaunchPads.
Poor man's CAN tester with 2 diodes and 1 resistor.
Version 2 of my lane detection system!
Use a Quadrature Encoder and EQEP with TMS570LC43x LaunchPad (and others).
Simple how-to guide to set up the ePWM module of your LaunchPad and increase / decrease the duty cycle with the two user buttons.
The Hercules TMS570LS04 does not have I2C hardware. We turn the onboard timer into an I2C master.
Configure the RAM space for the DMA touched memory in a correct way
How to use the two pushbuttons on the new Hercules LaunchPad type II.
Who said autonomous driving was only for the premium car manufacturers? SonicDisc enables you to autonomously park like a pro for $10.
Here is a very nice use of a sonar sensor and LCD - a parking sensor that can actually be useful.
Use Hologram's cellular network to monitor a fleet of vehicles using OBDII, Raspberry Pi, GPS, and GSM.
Adding an active NeoPixel lighting system to your E-Bike using the micro:bit.
Build your own small autonomous car with Android Things.
An accessory to monitor and analyze the performance of brakes in automotive vehiles.
A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution
Having problems with your car speedometer?! Just build a GPS-based one.
A Digistump-based LED strip that calculates what RPM corresponds to each gear to aid in heel-toe downshifting and rev-matching. Budget: $20
Sensors for a car.